4032-T-B1_B_470 Silicon Laboratories Inc, 4032-T-B1_B_470 Datasheet - Page 47

• Manufacturer Part Number: 4032-T-B1_B_470
• Description: KIT DEV TEST EZRADIOPRO SI4032
• Manufacturer: Silicon Laboratories Inc
• Type: Transceiverr

Specifications of 4032-T-B1_B_470

• Frequency: 470MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Si4032
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7.7. GPIO Configuration
Three general purpose IOs (GPIOs) are available. Numerous functions such as specific interrupts, TRSW control,
Microcontroller Output, etc. can be routed to the GPIO pins as shown in the tables below. When in Shutdown mode
all the GPIO pads are pulled low.
Note: The ADC should not be selected as an input to the GPIO in Standby or Sleep Modes and will cause excess current con-
The GPIO settings for GPIO1 and GPIO2 are the same as for GPIO0 with the exception of the 00000 default
setting. The default settings for each GPIO are listed below:
For a complete list of the available GPIO's see “AN466: Si4430/31/32 Register Descriptions.”
The GPIO drive strength may be adjusted with the gpioXdrv[1:0] bits. Setting a higher value will increase the drive
strength and current capability of the GPIO by changing the driver size. Special care should be taken in setting the
drive strength and loading on GPIO2 when the microcontroller clock is used. Excess loading or inadequate drive
may contribute to increased spurious emissions.
Add R/W
0B
0C
0D
0E
sumption.
R/W
R/W
R/W
R/W
Description
Configuration
Configuration
Configuration
Configuration
Function/
I/O Port
GPIO0
GPIO1
GPIO2
gpio0drv[1] gpio0drv[0]
gpio1drv[1] gpio1drv[0]
gpio2drv[1] gpio2drv[0]
D7
GPIO0
GPIO1
GPIO2
GPIO
extitst[2]
D6
extitst[1] extitst[0]
pup0
pup1
pup2
Rev 1.1
D5
00000—Default Setting
Microcontroller Clock
gpio0[4] gpio0[3] gpio0[2] gpio0[1] gpio0[0]
gpio1[4] gpio1[3] gpio1[2] gpio1[1] gpio1[0]
gpio2[4] gpio2[3] gpio2[2] gpio2[1] gpio2[0]
POR Inverted
D4
POR
itsdo
D3
Si4030/31/32-B1
dio2
D2
dio1
D1
dio0
D0
POR Def.
00h
00h
00h
00h
47