LIS3L02AQ3TR STMicroelectronics, LIS3L02AQ3TR Datasheet
LIS3L02AQ3TR
Specifications of LIS3L02AQ3TR
Available stocks
Related parts for LIS3L02AQ3TR
LIS3L02AQ3TR Summary of contents
Page 1
... May 2005 3-Axis - ±2g/±6g LINEAR ACCELEROMETER Figure 1. Package Table 1. Order Codes LIS3L02AQ3TR ±2g, ±6g and it is capable of measuring accelerations over a bandwidth of 1.5 KHz for all axes. The device bandwidth may be reduced by using external capac- itances. A self-test capability allows to check the me- chanical and electrical signal path of the sensor ...
Page 2
LIS3L02AQ3 Table 2. Pin Description N° Pin Internally not connected 4 GND 0V supply 5 Vdd Power supply 6 Vouty Output Voltage, y-channel 7 ST Self Test (Logic 0: normal mode; Logic 1: Self-test) 8 Voutx ...
Page 3
Table 3. Mechanical Characteristics (Temperature range -40°C to +85°C) All the parameters are specified @ Vdd =3.3V, T=25°C unless oth- erwise noted Symbol Parameter Ar 3 Acceleration Range So 4 Sensitivity SoDr Sensitivity Change Vs Temperature Voff 4 Zero-g Level ...
Page 4
LIS3L02AQ3 Table 4. Electrical Characteristics (Temperature range -40°C to +85°C) All the parameters are specified @ Vdd =3.3V, T=25°C unless otherwise noted Symbol Parameter Vdd Supply Voltage Idd Supply Current IddPdn Supply Current in Power Down Mode Vst Self Test ...
Page 5
Terminology Sensitivity describes the gain of the sensor and can be determined by applying 1g acceleration to it. As the sensor can measure DC accelerations this can be done easily by pointing the axis of interest towards the center ...
Page 6
LIS3L02AQ3 be compatible with the external world. The signals of the sensing element are multiplexed and fed into a low-noise capacitive charge amplifier that im- plements a Correlated Double Sampling system (CDS) at its output to cancel the offset and ...
Page 7
Taking in account that the internal filtering resistor (R the external filter cut-off frequency may be simplified as follows: The tolerance of the internal resistor can vary typically of ±20% within its ...
Page 8
LIS3L02AQ3 6 Typical performance characteristics 6.1 Mechanical Characteristics at 25°C Figure 5. x-axis 0-g level at 3. 1.55 1.6 1.65 0g LEVEL (V) Figure 6. y-axis 0-g level at 3. 1.55 1.6 ...
Page 9
Mechanical Characteristics derived from measurement in the -40 Figure 11. x-axis 0-g level change vs. temperature 1.5 1 Zerog level change (mg/ Figure 12. y-axis 0-g level change vs. temperature ...
Page 10
LIS3L02AQ3 6.3 Electrical characteristics at 25°C Figure 17. Noise density at 3.3V (x,y axes Noise density (ug/sqrt(Hz)) Figure 18. Noise density at 3.3V (z axis ...
Page 11
Package Information Figure 21. QFN-44 Mechanical Data & Package Dimensions mm DIM. MIN. TYP. MAX. A 1.70 1.80 1.90 A1 0.19 0.21 b 0.20 0.25 0.30 D 7.0 E 7.0 e 0.50 J 5.04 5.24 K 5.04 5.24 L ...
Page 12
LIS3L02AQ3 8 Revision History Table 7. Revision History Date Revision November 2004 May 2005 12/13 1 First Issue. 2 Major datasheet review. Description of Changes ...
Page 13
... No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics ...