DP83815DUJB National Semiconductor, DP83815DUJB Datasheet - Page 73

• Manufacturer Part Number: DP83815DUJB
• Description: IC, ENET CTRL 10BASET, 100MBPS, LBGA-160
• Manufacturer: National Semiconductor

Specifications of DP83815DUJB

• Data Rate: 100Mbps
• Ethernet Type: 10BASE-T
• Supply Current: 170mA
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: 0°C To +70°C
• No. Of Pins: 160
• Termination Type: SMD
• Filter Terminals: SMD
• Rohs Compliant: No
• Data Rate Max: 100Mbps
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4.0 Register Set
Bit
6
5
4
3
2
1
0
Jabber Detect Jabber Detect: This bit only has meaning in 10 Mb/s mode
Duplex Status Duplex:
Remote Fault Remote Fault:
Speed Status Speed10:
Link Status
Bit Name
Auto-Neg.
Complete
Loopback
Status
(Continued)
1 = Remote Fault condition detected (cleared on read of BMSR (address 0x84h) register or by reset).
Fault criteria: notification from Link Partner of Remote Fault via Auto-Negotiation
0 = No remote fault condition detected
This bit is a duplicate of the Jabber Detect bit in the BMSR register, except that it is not cleared upon a
read of the PHYSTS register.
1 = Jabber condition detected
0 = No Jabber
Auto-Negotiation Complete:
1 = Auto-Negotiation complete
0 = Auto-Negotiation not complete
Loopback:
1 = Loopback enabled
0 = Normal operation
This bit indicates duplex status and is determined from Auto-Negotiation or Forced Modes.
1 = Full duplex mode
0 = Half duplex mode
Note: This bit is only valid if Auto-Negotiation is enabled and complete and there is a valid link or if Auto-
Negotiation is disabled and there is a valid link.
This bit indicates the status of the speed and is determined from Auto-Negotiation or Forced Modes.
1 = 10 Mb/s mode
0 = 100 Mb/s mode
Note: This bit is only valid if Auto-Negotiation is enabled and complete and there is a valid link or if Auto-
Negotiation is disabled and there is a valid link.
Link Status:
This bit is a duplicate of the Link Status bit in the BMSR register, except that it will not be cleared upon a
read of the PHYSTS register.
1 = Valid link established (for either 10 or 100 Mb/s operation)
0 = Link not established
73
Description
www.national.com