PIC24FJ256GA106-I/MR Microchip Technology, PIC24FJ256GA106-I/MR Datasheet - Page 36

• Manufacturer Part Number: PIC24FJ256GA106-I/MR
• Description: IC, 16BIT MCU, PIC24F, 32MHZ, QFN-64
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GA106-I/MR

• Controller Family/series: PIC24
• No. Of I/o's: 53
• Ram Memory Size: 16KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Core Size: 16 Bit
• Program Memory Size: 256KB
• Peripherals: ADC, Comparator, PWM, RTC, Timer
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Number Of I /o: 53
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC24FJXXXDA1/DA2/GB2/GA3
TABLE 4-3:
DS39970B-page 36
DSWDTPS<3:0>
FCKSM<1:0>
FNOSC<2:0>
Note 1:
2:
3:
Bit Field
Bits<23:16> should be programmed to a value of 0x00 to ensure that accidental program execution of any
of the Configuration Words would be interpreted as a NOP opcode.
The JTAGEN bit can be modified only using In-Circuit Serial Programming™ (ICSP™).
Irrespective of the WPCFG status, if WPEND = 1 or if WPFP corresponds to the Configuration Words
page, the Configuration Words page will be protected
PIC24FJXXXGA3 CONFIGURATION BITS DESCRIPTION (CONTINUED)
CW2<10:8>
Register
CW4<3:0>
CW2<7:6>
(1)
Deep Sleep Watchdog Timer Postscale Select bits
The DS WDT prescaler is 32; this creates an approximate base time
unit of 1 ms.
11111 = 1:68,719,476736 (25.7 days)
11110 = 1:34,359,738368(12.8 days)
11101 = 1:17,179,869184 (6.4 days)
11100 = 1:8,589,934592 (77.0 hours)
11011 = 1:4,294,967296 (38.5 hours)
11010 = 1:2,147,483648 (19.2 hours)
11001 = 1:1,073,741824 (9.6 hours)
11000 = 1:536,870912 (4.8 hours)
10111 = 1:268,435456 (2.4 hours)
10110 = 1:134,217728 (72.2 minutes)
10101 = 1:67,108864 (36.1 minutes)
10100 = 1:33,554432 (18.0 minutes)
10011 = 1:16,777216 (9.0 minutes)
10010 = 1:8,388608 (4.5 minutes)
10001 = 1:4,194304 (135.3 s)
10000 = 1:2,097152 (67.7 s)
01111 = 1:1,048576 (33.825 s)
01110 = 1:524288 (16.912 s)
01101 = 1:262114 (8.456 s)
01100 = 1:131072 (4.228 s)
01011 = 1:65536 (2.114 s)
01010 = 1:32768 (1.057 s)
01001 = 1:16384 (528.5 ms)
01000 = 1:8192 (264.3 ms)
00111 = 1:4096 (132.1 ms)
00110 = 1:2048 (66.1 ms)
00101 = 1:1024 (33 ms)
00100 = 1:512 (16.5 ms)
00011 = 1:256 (8.3 ms)
00010 = 1:128 (4.1 ms)
00001 = 1:64 (2.1 ms)
00000 = 1:32 (1 ms)
Clock Switching and Fail-Safe Clock Monitor Selection Configuration bits
1x = Clock switching and Fail-Safe Clock Monitor are disabled
01 = Clock switching is enabled, Fail-Safe Clock Monitor is disabled
00 = Clock switching is enabled, Fail-Safe Clock Monitor is enabled
Initial Oscillator Source Selection bits
111 = Fast RC Oscillator with Postscaler module (FRCDIV)
110 = Reserved
101 = Low-Power RC Oscillator (LPRC)
100 = Secondary Oscillator (SOSC)
011 = Primary Oscillator with PLL module (XTPLL, HSPLL, ECPLL)
010 = Primary (XT, HS, EC) Oscillator
001 = Fast RC Oscillator with Postscaler and PLL module (FRCPLL)
000 = Fast RC (FRC) Oscillator
Description
 2010 Microchip Technology Inc.