PIC18F4585-E/ML Microchip Technology, PIC18F4585-E/ML Datasheet - Page 9

• Manufacturer Part Number: PIC18F4585-E/ML
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,LLCC,44PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4585-E/ML

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 48KB (24K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 44-QFN
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.25 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 44
• Number Of Timers: 1 x 8
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM163011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11 bit
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.2 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: I3-DB18F4680 - BOARD DAUGHTER ICEPIC3
• Lead Free Status / Rohs Status: Details

29. Module: Reset
30. Module: ECAN™ Technology
EXAMPLE 6:
© 2007 Microchip Technology Inc.
If (RXBnOVFL == 1)
This version of silicon does not support the func-
tionality described in Note 1 of parameter D002 in
Section 27.1
Voltage” of the Device Data Sheet. The RAM
content may be altered during a Reset event if the
following conditions are met.
• Device is accessing RAM.
• Asynchronous Reset (i.e., WDT, BOR or MCLR
Work around
None.
Date Codes that pertain to this issue:
All engineering and production devices.
Under specific conditions, the first five bits of a
transmitted identifier may not match the value in
the Transmit Buffer ID register, TXBnSIDH. The
following conditions must exist for the corruption to
occur:
1. A transmit message must be pending.
2. The ECAN module must detect a Start-Of-
Work around
None.
Date Codes that pertain to this issue:
All engineering and production devices.
occurs when a write operation is being
executed (start of a Q4 cycle).
Frame (SOF) in the third bit of interframe
space.
{
}
Temp_RXREG = RXBx; // Read receive buffer
If (MyFlag)
{
}
If (TXREQ == 1)// Is a transmission pending?
{
}
TXREQ = 1;
MyFlag = 0;
“DC
TXREQ = 0; // Clear transmit request
If (TXABT == 1)// Store transmission aborted status value
MyFlag = 1;
Characteristics:
// Has an overflow occurred?
// Was previous transmission aborted?
// Set transmit request
// Reset stored transmission aborted status
PIC18F2585/2680/4585/4680
Supply
31. Module: ECAN™ Technology
32. Module: ECAN™ Technology
Following an error on the bus, the ECAN module is
unable to switch from Listen Only mode directly to
Configuration mode.
Work around
Use the REQOP (CANCON<7:5>) bits to select
Normal mode as an intermediate step when
switching from Listen Only mode to Configuration
mode.
Date Codes that pertain to this issue:
All engineering and production devices.
Under specific conditions, the TXBxSIDH register
of the pending message for transmission may be
corrupted. The following conditions must exist for
this event to occur:
1. A transmit message must be pending.
2. All of the receive buffers must be full and a
3. A receiver buffer must be made available
Work around
Ensure that a receive buffer overflow condition
does not occur and/or ensure that a transmit
request is not pending if a receive buffer overflow
condition does exist.
The pseudo-code segment in Example 6 is an
example of how to disable a pending transmission.
This code is for illustration purposes only.
Date Codes that pertain to this issue:
All engineering and production devices.
received message is in the Message Assembly
Buffer (MAB).
(RXBxCON<RXFUL> set to '0') when a Start-
of-Frame (SOF) is recognized on the CAN bus,
or on the instruction cycle prior to the SOF for
the TXBxSIDH corruption event to occur. The
timing of this event is crucial.
DS80283E-page 9