10250T3 EATON CUTLER HAMMER, 10250T3 Datasheet - Page 215

• Manufacturer Part Number: 10250T3
• Description: CONTACT BLOCK, 2NC, 6A, SCREW
• Manufacturer: EATON CUTLER HAMMER

Specifications of 10250T3

• No. Of Poles: 2
• Contact Current Max: 6A
• Contact Voltage Ac Max: 600V
• Contact Voltage Dc Max: 250V
• Switch Terminals: Screw
• For Use With: 10250T Series Pushbuttons And Indicating Lights
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

March 2008
Contents
Description
Product Description . . . . . . . . 47-215
Features . . . . . . . . . . . . . . . . . . 47-216
Benefits . . . . . . . . . . . . . . . . . . 47-216
Standards and
Technical Data and
Product Selection
CA08102001E
Certifications. . . . . . . . . . . . . 47-216
Specifications . . . . . . . . . . . . 47-217
Momentary Pushbutton
Non-illuminated
Illuminated Pushbutton
Indicating Light Units . . . . 47-223
Illuminated Pushbuttons
Push-Pull Units . . . . . . . . . . 47-225
Illuminated Push-Pull
Push-Pulls . . . . . . . . . . . . . . 47-229
Selector Switch Units . . . . 47-231
Selector Switch Selection . . 47-233
Selector Switch Operators . 47-235
Illuminated Selector
Units . . . . . . . . . . . . . . . . . 47-218
Pushbuttons . . . . . . . . . . . 47-220
Units . . . . . . . . . . . . . . . . . 47-221
and Indicating Lights. . . . 47-224
Units . . . . . . . . . . . . . . . . . 47-226
Switch Operators. . . . . . . 47-237
Page
Description
Options
Mounting and Assembly . . . . 47-241
Catalog Number
Product Description
All the Industry-Proven Quality of
Eaton’s Cutler-Hammer
and E34 Series of Logic Devices,
plus Class I Division 2 Certification
The 10250T1H consists of a normally
open-normally closed factory sealed
contact block that is UL Listed for use
in Class I, Division 2, Groups B, C and
D (NEC 500 – 503) — Class I, Zone 2, IIB
+ H 2 (NEC 505) hazardous locations
and is rated for both NEMA A600 and
NEMA Q300. 10250T and E34 illumi-
nated components have also been UL
Listed for use in Class I, Division 2,
Groups B, C and D (NEC 500 – 503) —
Class I, Zone 2, IIB + H 2 (NEC 505).
This, combined with the industry-
proven Cutler-Hammer 10250T
30.5 mm pushbutton line, offers a
complete solution to Division 2 hazard-
ous location requirements.
Structure . . . . . . . . . . . . . . . . 47-242
For more information visit: www.eaton.com
Contact Block and
Enclosures. . . . . . . . . . . . . . 47-240
Pushbuttons & Indicating Lights
30.5 mm Class I Division 2 Hazardous Locations
10250T Heavy-Duty Oiltight and E34 Corrosion Resistant
Mounting Adapters . . . . . 47-239
Class I Division 2
®
10250T
Page
Single composite catalog numbers
for complete assembled stations and
operators for use in Division 2 hazardous
locations are featured throughout this
section.
Operator
The 30.5 mm 10250T pushbutton line
features a zinc die cast construction
with chrome-plated housing and
mounting nut.
Eaton’s Cutler-Hammer E34 Series
30.5 mm pushbutton line features the
same rugged die cast construction of
our 10250T line with an additional two-
layer 100% solid thermosetting
cathodic epoxy coating. This coating
provides a flat black smooth, consis-
tent, corrosion resistant surface that
has passed a demanding 600 hour salt
spray test. (The industry standard for
this 4X test requires only 200 hours.)
Ultraviolet Light
E34 epoxy coating is not recom-
mended for use in applications where
exposure to ultraviolet light exists —
use NEMA 4X 10250T operators.
Ratings
Our Class I Division 2 line of pushbuttons
are UL Listed (NEMA type) 1, 2, 3, 3R,
4, 4X, 12 and 13. Our Class I Division 2
E34 line meets IEC 947-1 IP66 standards
and the cathodic coating meets FDA
3A sanitary chemical resistance
requirements. For a complete listing of
all applicable ratings see Page 47-217.
47-215
47