CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 187

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4-4
4-4-4
4-50
Automatically Set Data Links
Transferring Automatic Data Link Setup Parameters to the Startup Node
Reading Data from the Startup Node
Note
• The data link mode (manual/automatic) and data link operation are determined by the
• Before starting the data links with automatic setup, make sure that the correct
Perform this operation to check or change settings.
1 Click the Read Button in either the Automatic Datalink (Controller Link) or the
2 Click the Yes Button.
data link setup at the startup node. With automatic setup, it is necessary to set, for the
startup node, the data link mode (automatic) and the number of data link words in the
Automatic Datalink Setup Dialog Box. If these are not set correctly, the data links will
not start.
automatic data link setup parameters are set for the data link startup node. If incorrect
automatic data link setup parameters are set, it may cause the equipment to operate
unpredictably. Even when the correct parameters are set, make sure that there will be
no adverse effect on the equipment before starting or stopping the data links.
Automatic Datalink Setup Dialog Box.
The following dialog box will be displayed for confirmation.
The set data will be transferred from the PLC and displayed at the Automatic
Datalink (Controller Link) or the Automatic Datalink Setup Dialog Box.