EA-IF-E2 EA ELEKTRO-AUTOMATIK, EA-IF-E2 Datasheet - Page 67

no-image

EA-IF-E2

Manufacturer Part Number
EA-IF-E2
Description
INTERFACE ETHERNET (EA-PSI/BCI800R)
Manufacturer
EA ELEKTRO-AUTOMATIK
Datasheet

Specifications of EA-IF-E2

Svhc
No SVHC (18-Jun-2010)
Accessory Type
Interface Card
Applications
Engineering Laboratory And Complex Industrial Application
Approval Bodies
CE / EN
Rohs Compliant
Yes
For Use With
EA Elektro-Automatik PSU
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
About the interface cards
© 009, Elektro-Automatik GmbH & Co. KG
The bits of the ESR are as follows:
Bit 0:
Bit 1:
Bit :
Bit 3:
Bit 4:
Bit 5:
Bit 6:
Bit 7
Event and status registers can be cleared by using the command *CLS.
Status commands
The Operation Status Register (OPER) (see diagram on previous page) stores the several status (remote, local etc. ) in
register Condition and forwards them to the register Event, as long as they are enabled by Enable. The masks Positive
transition and Negative transition determine if the events are triggered by a rising edge or a falling edge. This can be used
to sense the appearance and/or disappearance of a status.
The same applies for the Questionable Status Register (QUES). The configuration for the OPER, as shown in the diagram,
would cause an event only if the signal „local“ changes from low to high. The signal „Function mode“, on the other hand,
would cause the event also at a falling edge.
STATus
Examples:
STAT:OPER?
STAT:QUES?
STAT:OPER:ENAB255
:OPERation
:QUEStionable
Operation complete, relates to averaging feature (see below), is set if averaging completed successfully
Not used
Query error
Device Dependent Error (Hardware defective etc.); errors from -399 to -300 resp. 100...399
Execution Error (current limitation, other limits exceeded); errors from -99 to -00
Command Error; Errors from -199 to -100
Not used
Power On (device was turned on)
[:EVENT]?
:CONDition?
:ENABle
:ENABle?
:PTRtransition
:PTRtransition?
:NTRtransition
:NTRtransition?
[:EVENT]?
:CONDition?
:ENABle
:ENABle?
:PTRtransition
:PTRtransition?
:NTRtransition
:NTRtransition?
-><+INT>
-><+INT>
-><+INT>
-><+INT>
-><+INT>
-><+INT>
-><+INT>
-><+INT>
-><+INT>
-><+INT>
Queries the OPERation Status Event Register
Queries the QUEStionable Status Event Register
Enables all events for the OPERation Status Event register
<+INT>
<+INT>
<+INT>
<+INT>
<+INT>
<+INT>
Operation depending status
Queries the events in the Status Operation Register
Query OPER event conditions
Enable events for OPER
Query
Event will be triggered only at rising edge
Query
Event will be triggered only at falling edge
Query
Device and function specific events
Query the events in the Questionable Status Register
Query QUES event conditions
Enable events for QUES
Query
Event will be triggered only at rising edge
Query
Event will be triggered only at falling edge
Query
EN
67

Related parts for EA-IF-E2