AFBR-57R6APZ Avago Technologies US Inc., AFBR-57R6APZ Datasheet - Page 5

• Manufacturer Part Number: AFBR-57R6APZ
• Description: MM 4/2/1 Gb RoHS W Rate Select
• Manufacturer: Avago Technologies US Inc.

Specifications of AFBR-57R6APZ

• Data Rate: 4.25Gbps
• Wavelength: 850nm
• Applications: Ethernet
• Voltage - Supply: 2.97 V ~ 3.63 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5
Electrostatic Discharge (ESD)
The AFBR-57R6APZ is compatible with ESD levels
found in typical manufacturing and operating
environments as described in Table 1. In the normal
handling and operation of optical transceivers, ESD is
of concern in two circumstances.
The first case is during handling of the transceiver prior
to insertion into an SFP compliant cage. To protect the
device, it’s important to use normal ESD handling pre-
cautions. These include use of grounded wrist straps,
work-benches and floor wherever a transceiver is
handled.
The second case to consider is static discharges to the
exterior of the host equipment chassis after installation.
If the optical interface is exposed to the exterior of host
equipment cabinet, the transceiver may be subject to
system level ESD requirements.
Table 1. Regulatory Compliance
Feature
Electrostatic Discharge (ESD)
to the Electrical Pins
Electrostatic Discharge (ESD)
to the Duplex LC Receptacle
Electrostatic Discharge (ESD)
to the Optical Connector
Electromagnetic Interference
(EMI)
Immunity
Laser Eye Safety and
Equipment Type Testing
Component Recognition
RoHS Compliance
Product Safety
Rheinland
TUV
¨
APPROVED
GEPRUFT
BAUART
TYPE
¨
Test Method
MIL-STD-883C
Method 3015.4
Variation of IEC 61000-4-2
GR1089
Variation of IEC 801-2
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class 1
Variation of IEC 61000-4-3
US FDA CDRH AEL Class 1
US21 CFR, Subchapter J per
Paragraphs 1002.10
(IEC) EN60825-1: 1994 + A11 + A2
(IEC) EN60825-2: 1994 + A1
(IEC) EN60950: 1992 + A1 + A2 +
Underwriters Laboratories and
Canadian Standards Association
Joint Component Recognition
for Information Technology
Equipment including Electrical
Business Equipment
and 1002.12
A3 + A4 + A11
Electromagnetic Interference (EMI)
Equipment incorporating gigabit transceivers is
typically subject to regulation by the FCC in the United
States, CENELEC EN55022 (CISPR 22) in Europe and
VCCI in Japan. The AFBR-57R6APZ’s compliance to
these standards is detailed in Table 1. The metal housing
and shielded design of the AFBR-57R6APZ minimizes
the EMI challenge facing the equipment designer.
EMI Immunity (Susceptibility)
Due to its shielded design, the EMI immunity of the
AFBR-57R6APZ exceeds typical industry standards.
Flammability
The AFBR-57R6APZ optical transceiver is made of
metal and high strength, heat resistant, chemical
resistant and UL 94V-0 flame retardant plastic.
Performance
Class 1 (> 2000 Volts)
Typically, no damage occurs with 25 kV when
the duplex LC connector receptacle is
contacted by a Human Body Model probe.
10 contacts of 8 kV on the electrical faceplate
with device inserted into a panel.
Air discharge of 15 kV (min.) contact to
connector without damage.
System margins are dependent on customer
board and chassis design.
Typically shows no measurable effect from a
10 V/m field swept from 10 MHz to 1 GHz.
CDRH certification # 9720151-48
TUV file # R72042669
UL File # E173874
Less than 1000 ppm of cadmium, lead, mercury,
hexavalent chromium, polybrominated biphenyls,
and polybrominated biphenyl ethers.