EM-LPC1300 EMBEST, EM-LPC1300 Datasheet - Page 9

• Manufacturer Part Number: EM-LPC1300
• Description: NXP LPC1300 ARM Cortex-M3 Evaluation Board
• Manufacturer: EMBEST

Specifications of EM-LPC1300

• Silicon Manufacturer: NXP
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Features: RS232, USB, JTAG Interface, 12MHz XTAL Frequency
• Silicon Core Number: LPC13xx
• Silicon Family Name: LPC13xx

1) After typing ‘2’,it displays the brief information about this test in the terminal.
2) According tip message, you can type in any non-control character using PC keyboard. The corresponding
1) After typing ‘3’,it displays the brief information about this test in the terminal.
2) The USB Memory is automatically recognized by the host PC running Windows which will load a generic
1) After typing ‘4’,it displays the brief information about this test in the terminal.
2) This testcase configures I2C working in master mode, and Read/Write EEPROM using I2C bus. Init
1) After typing ‘5’,it displays the brief information about this test in the terminal.
one short message ‘PIOINT0_IRQHandler!’ in the terminal. See it as below.
letter can be displayed in the terminal. For example as below.
Mass Storage driver. Then you can find this device in PC hardware list. Open “my computer” icon on your
desktop. You can find a new removable storage devices with name “LPC134x USB”. You can also open a
readme.txt file from this device. The content of this file is the brief information about this demo. They are
“This is a USB Memory Device demonstration for the NXP NXP13XX Board with Philips LPC1343.”
buffer,send the buffer data to EEPROM,read them and compare. If the data read is the same as data
written,then test success. It displays message “I2C EEPROM test success!” in the terminal.
2 option: UART sends and receives data test.
3 option: USB Mass Storage test.
4 option: I2C EEPROM test.
5 option: I2C Temperature Sensor test.
PIOINT0_IRQHandler!
-- Basic UART Project V1.0 --
-- EM-LPC1300 --
-- Please input any key on the keyboard --
.fdf2eqf314jkj51455254/*-/4516445561…
-- Basic USB Mem Project V1.0 --
-- EM-LPC1300 --
-- USB Memory Storage test --
-- Basic I2C EEPROM Project V1.0 --
-- EM-LPC1300 --
-- I2C Read/Write EEPROM test --
I2C EEPROM test success!
-- Basic I2C Temperature Sensor Project V1.0 --
-- EM-LPC1300 --
-- I2C Temperature Sensor test --
-I- Temperature Register value:0x1100
-I- Configuration Register value:0x0
-I- Tos Set Point Register value:0x80
PIOINT0_IRQHandler!
PIOINT0_IRQHandler!
www.embedinfo.com/en
9/26