MFEV700HABM NXP Semiconductors, MFEV700HABM Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
MFEV700HABM
Manufacturer Part Number
MFEV700HABM
Description
MCU, MPU & DSP Development Tools MIFARE PEGODA DEMO READER
Manufacturer
NXP Semiconductors
Datasheet
1.MFEV700HAB122.pdf
(16 pages)
Specifications of MFEV700HABM
Processor To Be Evaluated
MF RD700
Data Bus Width
16 bit
Other names
MFEV700/HAB,122
Philips Semiconductors
Preliminary Specification Rev. 1.0 November 2001
MIFARE Pegoda Contactless Card Reader
MF RD700
Core component of the Pegoda is the MF RC500, the highly integrated ISO 14443A reader IC. For detailed
information concerning the MF RC 500 refers to the data sheet: ‘MIFARE MF RC500 Highly integrated ISO
14443 reader IC’ .
The RC 500 is used as an analog front-end unit to communicate via the antenna to a contactless chip card.
All relevant data coding to send and receive data according to the ISO 14443A is done internally by the MF
RC 500. The MF RC500 itself is controlled by a 16 bit µ-controller using an internal clock frequency of
36MHz generated by an external 8 MHz quartz oscillator.
The µ-controller handles the communication to the host PC via USB. The µ-Controller translates the serial
protocol via USB into remote function calls and executes the appropriate command. To be able to implement
the complete MIFARE Classic protocol and the ISO 14443-4 open protocol commands and to handle the
host communication a 4 Mbit Flash Ram is implemented.
The design of the reader offers the possibility to update the firmware without hardware adaptation.
Note: This document is not intended to give detailed information concerning the MF RM700 and the MF
AN700. Please refer to the related documents in the full evaluation package MF EV800.
6