KSZ8842-PMBL AM TR Micrel Inc, KSZ8842-PMBL AM TR Datasheet - Page 75

• Manufacturer Part Number: KSZ8842-PMBL AM TR
• Description: 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-PMBL AM TR

• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Supplier Unconfirmed

Micrel, Inc.
Port 1 Control Register 2 (Offset 0x0502): P1CR2
This register contains the global per port control for the switch port 1 function.
October 2007
Bit
15
14
13
12
11
10
9
8
7
6
5
4
3
Default
0
0
0
0
0
1
1
0
0
0
0
0
0
R/W
R/W
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
RW
Description
Reserved
Ingress VLAN filtering
1 = the switch will discard packets whose VID port membership in VLAN
table bits [18:16] does not include the ingress port.
0 = no ingress VLAN filtering.
Discard Non PVID packets
1 = the switch will discard packets whose VID does not match ingress port
default VID.
0 = no packets will be discarded.
Force flow control
1 = will always enable flow control on the port, regardless of AN result.
0 = the flow control is enabled based on AN result.
Back pressure enable
1 = enable port’s half duplex back pressure
0 = disable port’s half duplex back pressure.
Transmit enable
1 = enable packet transmission on the port
0 = disable packet transmission on the port
Receive enable
1 = enable packet reception on the port
0 = disable packet reception on the port
Learning disable
1 = disable switch address learning capability
0 = enable switch address learning
Sniffer port
1 = Port is designated as sniffer port and will transmit packets that are
monitored.
0 = Port is a normal port
Receive sniff
1 = All the packets received on the port will be marked as “monitored
packets” and forwarded to the designated “sniffer port”
0 = no receive monitoring
Transmit sniff
1 = All the packets transmitted on the port will be marked as “monitored
packets” and forwarded to the designated “sniffer port”
0 = no transmit monitoring
Reserved
User Priority Field
1 = if the packet’s “user priority field” is greater than the “user priority bits”
in port 1’s VID Control register bits [15:13], replace the packet’s “user
priority field” with the “user priority bits” in port 1’s VID Control register bits
[15:13].
0 = do not compare and replace the packet’s ‘user priority field”
75
KSZ8842-PMQL/PMBL
M9999-100207-1.5