KSZ8893MQL Micrel Inc, KSZ8893MQL Datasheet - Page 72

• Manufacturer Part Number: KSZ8893MQL
• Description: IC,Telecom Switching Circuit,CMOS,QFP,128PIN,PLASTIC
• Manufacturer: Micrel Inc

Specifications of KSZ8893MQL

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Commercial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-1477-5

Register 19 (0x13): Port 1 Control 3
Register 35 (0x23): Port 2 Control 3
Register 51 (0x33): Port 3 Control 3
Register 20 (0x14): Port 1 Control 4
Register 36 (0x24): Port 2 Control 4
Register 52 (0x34): Port 3 Control 4
Note: Registers 19 and 20 (and those corresponding to other ports) serve two purposes:
Register 21 (0x15): Port 1 Control 5
Register 37 (0x25): Port 2 Control 5
Register 53 (0x35): Port 3 Control 5
Bit
7-0
Bit
7-0
Bit
7-4
3-2
1
0
December 2007
1. Associated with the ingress untagged packets, and used for egress tagging.
2. Default VID for the ingress untagged or null-VID-tagged packets, and used for address lookup.
Name
Default Tag
[15:8]
Name
Default Tag
[7:0]
Name
Reserved
Limit Mode
Count IFG
Count Pre
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Description
Port’s default tag, containing
Description
Port’s default tag, containing
Description
Reserved
Do not change the default values.
Ingress Limit Mode
These bits determine what kinds of frames are
limited and counted against ingress rate limiting.
= 00, limit and count all frames
= 01, limit and count Broadcast, Multicast, and
flooded unicast frames
= 10, limit and count Broadcast and Multicast
frames only
= 11, limit and count Broadcast frames only
Count IFG bytes
= 1, each frame’s minimum inter frame gap
(IFG) bytes (12 per frame) are included in
Ingress and Egress rate limiting calculations.
= 0, IFG bytes are not counted.
Count Preamble bytes
= 1, each frame’s preamble bytes (8 per
frame) are included in Ingress and Egress rate
limiting calculations.
= 0, preamble bytes are not counted.
7-5 : User priority bits
3-0 : VID[11:8]
7-0 : VID[7:0]
4 : CFI bit
72
Default
0x00
Default
0x01
Default
0x0
00
0
0
M9999-121007-1.5