ADAU1961WBCPZ Analog Devices Inc, ADAU1961WBCPZ Datasheet - Page 27

• Manufacturer Part Number: ADAU1961WBCPZ
• Description: IC STEREO AUD CODEC LP 32LFCSP
• Manufacturer: Analog Devices Inc
• Type: Audio Codecr

Specifications of ADAU1961WBCPZ

• Data Interface: Serial
• Resolution (bits): 24 b
• Number Of Adcs / Dacs: 2 / 2
• Sigma Delta: No
• S/n Ratio, Adcs / Dacs (db) Typ: 99 / 101
• Dynamic Range, Adcs / Dacs (db) Typ: 99 / 101
• Voltage - Supply, Analog: 2.97 V ~ 3.63 V
• Operating Temperature: -40°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 32-VFQFN, CSP Exposed Pad
• Audio Codec Type: Stereo
• No. Of Adcs: 2
• No. Of Dacs: 2
• No. Of Input Channels: 2
• No. Of Output Channels: 2
• Adc / Dac Resolution: 24bit
• Adcs / Dacs Signal To Noise Ratio: 101dB
• Sampling Rate: 96kSPS
• No. Of: RoHS Compliant
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RECORD SIGNAL PATH
INPUT SIGNAL PATHS
The ADAU1961 can accept both line level and microphone
inputs. The analog inputs can be configured in a single-ended
or differential configuration. There is also an input for a digital
microphone. The analog inputs are biased at AVDD/2. Unused
input pins should be connected to CM.
Each of the six analog inputs has individual gain controls (boost
or cut). The input signals are mixed and routed to an ADC. The
mixed input signals can also bypass the ADCs and be routed
directly to the playback mixers. Left channel inputs are mixed
before the left ADC; however, it is possible to route the mixed
analog signal around the ADC and output it into a left or right
output channel. The same capabilities apply to the right channel
and the right ADC.
JACKDET/MICIN
RAUX
LAUX
RINP
RINN
LINN
LINP
RDVOL[5:0]
LDVOL[5:0]
PGA
PGA
ALC
CONTROL
ALC
CONTROL
–12dB TO
+35.25dB
–12dB TO
+35.25dB
ALCSEL[2:0]
ALCSEL[2:0]
RDBOOST[1:0]
LDBOOST[1:0]
RINPG[2:0]
RINNG[2:0]
LINNG[2:0]
LINPG[2:0]
MX1AUXG[2:0]
MX2AUXG[2:0]
–12dB TO +6dB
–12dB TO +6dB
MUTE/0dB/20dB
MUTE/0dB/20dB
–12dB TO +6dB
–12dB TO +6dB
–12dB TO +6dB
–12dB TO +6dB
Figure 31. Record Signal Path
Rev. 0 | Page 27 of 76
(LEFT RECORD
Signals are inverted through the PGAs and the mixers. The
result of this inversion is that differential signals input through
the PGA are output from the ADCs at the same polarity as they
are input. Single-ended inputs that pass through the mixer but
not through the PGA are inverted. The ADCs are noninverting.
The input impedance of the analog inputs varies with the gain
of the PGA. This impedance ranges from 1.7 kΩ at the 35.25 dB
gain setting to 80.4 kΩ at the −12 dB setting. This range is shown
in Figure 22.
(RIGHT RECORD
MIXER 1
MIXER)
AUXILIARY
BYPASS
MICROPHONE
MIXER 2
INTERFACE
MIXER)
(TO PLAYBACK
DIGITAL
(TO PLAYBACK
OUTPUT
MIXER 2
MIXER 1
OUTPUT
MIXER)
MIXER)
RIGHT
LEFT
ADC
ADC
MICIN LEFT
MICIN RIGHT
INSEL
INSEL
ADAU1961
DECIMATOR/
DIGITAL
VOLUME
ALC/