CYII4SD1300AA-QWC Cypress Semiconductor Corp, CYII4SD1300AA-QWC Datasheet - Page 18
![no-image](/images/manufacturer_photos/0/1/179/cypress_semiconductor_corp_sml.jpg)
CYII4SD1300AA-QWC
Manufacturer Part Number
CYII4SD1300AA-QWC
Description
IC SENSOR IMAGE COLOR 84-LCC
Manufacturer
Cypress Semiconductor Corp
Type
CMOS Imagingr
Datasheet
1.CYII4SM1300AA-QDC.pdf
(35 pages)
Specifications of CYII4SD1300AA-QWC
Pixel Size
7µm² x 7µm²
Active Pixel Array
1286H x 1030V
Frames Per Second
7
Voltage - Supply
5V
Package / Case
84-LCC
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
CYII4SM1300AA
Figure 14.
shows the ADC transfer characteristic. For this measurement, the ADC input was connected to a 16-bit DAC. The input
voltage was a 100 kHz triangle waveform.
The non-linear ADC conversion is intended for gamma-correction of the images. It increases contrast in dark areas and reduces
contrast in bright areas. The non-linear curve is tolerant for external pixel offset error correction. This means that pixel offset variations
can be corrected by changing the offset after the non-linear AD conversion. This is so because the non-linear transfer function is
H(s) = 1-exp(-a*s)
by design, and neglecting the offset, the relation between the non-linear output (y) and the linear output (x) is exactly:
Y = 1024 * (1 - exp(-x/713)) / (1 - exp(-1024/713))
This law yields an increased accuracy of about a factor 2 near the zero end of the scale. It is thus possible to obtain an effective 11
bit accuracy on a linear scale after post processing by applying the reverse law to the non-linear output:
Z = -2 * 713 * ln(1 - y/(1024/(1-exp(-1024/713)))) = -1426 * ln(1-y/1343.5)
Then Z is an 11-bit linear output in the range 0...2047.
Document Number: 38-05707 Rev. *C
Page 18 of 35
[+] Feedback