CYII5SC1300AB-QDC Cypress Semiconductor Corp, CYII5SC1300AB-QDC Datasheet - Page 25
![no-image](/images/manufacturer_photos/0/1/179/cypress_semiconductor_corp_sml.jpg)
CYII5SC1300AB-QDC
Manufacturer Part Number
CYII5SC1300AB-QDC
Description
SENSOR IMAGE COLOR CMOS 84-LCC
Manufacturer
Cypress Semiconductor Corp
Type
CMOS Imagingr
Specifications of CYII5SC1300AB-QDC
Pixel Size
6.7µm x 6.7µm
Active Pixel Array
1280H x 1024V
Frames Per Second
27
Voltage - Supply
3 V ~ 4.5 V
Package / Case
84-LCC
Sensor Image Color Type
Color
Sensor Image Size Range
>= 480,000Pixels
Sensor Image Size
1280x1024Pixels
Operating Supply Voltage (min)
3V
Operating Supply Voltage (typ)
3.3V
Operating Supply Voltage (max)
3.6V
Operating Temp Range
0C to 65C
Package Type
CLCC
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Pin Count
84
Package
84CLCC
Image Size
1280x1024 Pixels
Color Sensing
Color
Operating Temperature
0 to 65 °C
Operating Supply Voltage
3 to 3.6 V
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Windowing in Y-Direction
Reapply the Y_START pulse after loading a new Y-pointer value
into the YL_REG and YR_REG registers to load a new Y-pointer
into the Y-shift-register.
Every time a Y_START pulse appears, a frame calibration of the
output amplifier occurs.
Document #: 38-05710 Rev. *H
Figure 28. Windowing in Y-Direction
Initialization (Startup Behavior)
To avoid any high current consumption at startup, apply the
SYS_CLOCK signal as soon as possible after or even before
power on of the image sensor. After power on, apply
SYS_RESET for a minimum of five SYS_CLOCK periods to
ensure a proper reset of the on-chip sequencer and timing
circuitry. All internal registers are set to ‘0’ after SYS_RESET is
applied.
Because all the IBIS5-B-1300 control signals are active high,
apply a low level (before SYS_RESET occurs) to these pins at
start up to avoid latch up.
CYII5SM1300AB
Page 25 of 35
[+] Feedback