ADNB-6031-EV Avago Technologies US Inc., ADNB-6031-EV Datasheet - Page 29

• Manufacturer Part Number: ADNB-6031-EV
• Description: OPT SENS BUNDLE W/A-6030 RL CLIP
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNB-6031-EV

• Description/function: Laser Mouse Bundle
• Interface Type: SPI
• Product: Display Modules
• Touch Panel: No Touch Panel
• For Use With/related Products: ADNS-6030
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Self_Test
Access: Write
Data Type
USAGE : Set the TESTEN bit in register 0x10 to start the system self-test. The test takes 250ms. During this time, do
not write or read through the SPI port. Results are available in the CRC0-3 registers. After self-test, reset the chip to
start normal operation.
Configuration_bits
Access: Read/Write
Data Type
USAGE : Register 0x11 allows the user to change the configuration of the sensor. Setting the RESTEN
the sensor into Rest mode, as described in the power modes section above. The RES bit allows selection between
400 and 800 cpi resolution.
Note: Forced Rest has a long wakeup time and should not be used for power management during normal mouse
motion.
Reserved
29
Field Name
TESTEN
Field Name
RESTEN
RES
Field
Field
Bit
Bit
1-0
Reserved
RES
7
7
: Bit field
: Bit field
Address: 0x12-0x19
Description
Enable System Self Test
0 = Disabled
1 = Enable
Description
Puts chip into Rest mode
00 = normal operation
01 = force Rest1
11 = force Rest3
Sets resolution
0 = 400
1 = 800
Reserved
Reserved
6
6
Reserved
Address: 0x10
Reset Value: NA
RESTEN
5
Address: 0x11
Reset Value: 0x03
5
1
Reserved
RESTEN
4
4
0
Reserved
Reserved
3
3
Reserved
Reserved
2
2
Reserved
Reserved
1
1
1-0
bits forces
Reserved
TESTEN
0
0