D4BL-3CRB-A Omron, D4BL-3CRB-A Datasheet - Page 4

• Manufacturer Part Number: D4BL-3CRB-A
• Description: Contact OSTI For Purchase
• Manufacturer: Omron
• Series: D4BLr

Specifications of D4BL-3CRB-A

• Contact Configuration: DPST-1NC / 1NO + SPST-NC
• Contact Voltage Ac Max: 250V
• Contact Current Ac Max: 10A
• Switch Operation: ON
• Switch Terminals: Screw
• Contact Current Max: 10A
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

■ Characteristics
Note: 1. The above values are initial values.
Solenoid Coil Characteristics
Indicator Characteristics
Degree of protection (See note 2.)
Durability
(See note 3.)
Operating speed
Operating frequency
Direct opening force (See note 4.)
Direct opening travel (See note 4.)
Holding force
Contact resistance
Rated insulation voltage (U
Rated frequency
Protection against electric shock
Pollution degree (operating environment)
Impulse withstand
voltage
(EN60947-5-1)
Insulation resistance
Contact gap
Vibration resistance
Shock resistance
Conditional short-circuit current
Conventional enclosed thermal current (I
Ambient operating temperature
Ambient operating humidity
Weight
Rated operating voltage
Current consumption
Insulation
Rated voltage
Current leakage
Color (LED)
2. The degree of protection is tested using the method specified by the standard (EN60947-5-1). Confirm that sealing properties are
3. The durability is for an ambient temperature of 5 to 35 C and an ambient humidity of 40% to 70%.
4. These figures are minimum requirements for safe operation.
sufficient for the operating conditions and environment beforehand. Although the switch box is protected from dust, oil or water
penetration, do not use the D4BL in places where dust, oil, water, or chemicals may enter through the key hole on the head, otherwise
Switch damage or malfunctioning may occur.
Item
Item
http://www.ia.omron.com/
Mechanical
Electrical
Between terminals
of same polarity
Between terminals
of different polarity
Between each
terminal and ground
Between solenoid
and ground
Malfunction
Destruction
Malfunction
i
)
24 VDC
Approx. 300 mA
Class F (130 C or less)
24-VDC mechanical lock models 110-VAC mechanical lock models
+10%
15%
10 to 115 VAC/VDC
Approx. 1 mA
Orange, green
the
(100% ED)
) 10 A (EN60947-5-1)
IP67 (EN60947-5-1) (This applies for the Switch only. The degree of protection for the key hole
is IP00.)
1,000,000 operations min.
500,000 operations min. (10-A resistive load at 250 VAC)
0.05 to 0.5 m/s
30 operations/minute max.
19.61 N min. (EN60947-5-1)
20 mm min. (EN60947-5-1)
700 N min. (GS-ET-19)
50 m max.
300 V (EN60947-5-1)
50/60 Hz
Class I (with ground terminal)
3 (EN60947-5-1)
4 kV
2.5 kV
100 M min. (at 500 VDC)
2
10 to 55 Hz, 0.35-mm single amplitude
1,000 m/s
300 m/s
100 A (EN60947-5-1)
–10 to 55 C (with no icing)
95% max.
Approx. 800 g
2 mm min.
2
min.
2
min.
110 VAC 10% (50/60 Hz)
Approx. 98 mA
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
LED
24 VDC
Approx. 300 mA
24-VDC solenoid lock models
+10%
15%
(100% ED)
D4BL
4