LAN9313-NU SMSC, LAN9313-NU Datasheet - Page 209

• Manufacturer Part Number: LAN9313-NU
• Description: Ethernet ICs Three Port 10/100 Ethernet Switch
• Manufacturer: SMSC
• Type: Three Port Managed Ethernet Switchr

Specifications of LAN9313-NU

• Ethernet Connection Type: 10 Base-T, 100 Base-TX
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Switches
• Number Of Transceivers: 1
• Standard Supported: 802.3, 802.3u
• Data Rate: 10 Mbps, 100 Mbps
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 0 V
• Supply Current (max): 155 mA, 270 mA
• Maximum Operating Temperature: + 70 C
• Package / Case: TQFP-100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Three Port 10/100 Managed Ethernet Switch with MII
Datasheet
SMSC LAN9313/LAN9313i
13.1.7
INDEX #
31
0
1
2
3
4
5
6
Virtual PHY
This section details the Virtual PHY System CSR’s. These registers provide status and control
information similar to that of a real PHY while maintaining IEEE 802.3 compatibility. The Virtual PHY
registers are addressable via the memory map, as described in
MII management protocol (IEEE 802.3 clause 22). When accessed serially, these registers are
accessed through the MII management pins (in PHY modes only) via the MII serial management
protocol specified in IEEE 802.3 clause 22. See
detailed description of the various LAN9313/LAN9313i modes. When being accessed serially, the
Virtual PHY will respond when the PHY address equals the address assigned by the
phy_addr_sel_strap configuration strap, as defined in
list of all Virtual PHY register indexes for serial access can be seen in
on the Virtual PHY access modes, refer to section
operation information, see
Note: All Virtual PHY registers follow the IEEE 802.3 (clause 22.2.4) specified MII management
Note: When serially accessed, the Virtual PHY registers are only 16-bits wide, as is standard for MII
VPHY_AN_LP_BASE_ABILITY
VPHY_BASIC_STATUS
VPHY_SPEC_CTRL_STATUS
register set. All functionality and bit definitions comply with these standards. The IEEE 802.3
specified register index (in decimal) is included under the LAN9313/LAN9313i memory mapped
offset of each Virtual PHY register as a reference. For additional information, refer to the IEEE
802.3 Specification.
management of PHY’s.
VPHY_BASIC_CTRL
VPHY_AN_ADV
VPHY_AN_EXP
VPHY_ID_MSB
Table 13.4 Virtual PHY MII Serially Adressable Register Index
VPHY_ID_LSB
SYMBOL
Section 7.3, "Virtual PHY," on page
DATASHEET
Virtual PHY Basic Control Register,
Virtual PHY Basic Status Register,
Virtual PHY Identification MSB Register,
Virtual PHY Identification LSB Register,
Virtual PHY Auto-Negotiation Advertisement Register,
Section 13.1.7.5
Virtual PHY Auto-Negotiation Link Partner Base Page Ability
Register,
Virtual PHY Auto-Negotiation Expansion Register,
Section 13.1.7.7
Virtual PHY Special Control/Status Register,
209
Section 13.1.7.6
Section 2.3, "Modes of Operation," on page 23
Section
Section 7.1.1, "PHY Addressing," on page
REGISTER NAME
13.2. For Virtual PHY functionality and
98.
Table
Table
13.1, as well as serially via the
Section 13.1.7.2
Section 13.1.7.1
13.4. For more information
Section 13.1.7.4
Section 13.1.7.3
Revision 1.7 (06-29-10)
Section 13.1.7.8
84. A
for a