SI2493-C-FT Silicon Laboratories Inc, SI2493-C-FT Datasheet - Page 160

• Manufacturer Part Number: SI2493-C-FT
• Description: 56 KBPS, V.92 ISOMODEM SYSTEM-SIDE - LEAD-FREE TSSOP 0 TO 7
• Manufacturer: Silicon Laboratories Inc

Specifications of SI2493-C-FT

• Mfg Application Notes: SI2493/57/34/15/04, Appl Note AN93
• Data Format: V.21, V.22, V.23, V.29, V.32, V.34, V.90, V.92, Bell 103, Bell 212A
• Baud Rates: 56k
• Interface: Parallel
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AN93
160
Connect prototype system ground to EVB ground
Remove modem module from EVB
Disconnect host outputs from prototype modem
Connect EVB RS232 transceivers to prototype modem
Use PC with HyperTerminal to test prototype modem
Connect the prototype ground to the EVB ground.
Lift prototype C1 and C2 and EVB C1 and C2 so the Si3018 is disconnected from the Si24xx on both modems.
Connect EVB C1 and C2 to the Si3018 pad of prototype system C1 and C2.
Connect the phone line to the RJ11 jack on the prototype system.
Use PC and HyperTerm and attempt to establish a modem connection.
Controller
Controller
PC
PC
Host
Host
EVB
EVB
Transceiver
Transceiver
RS232
RS232
UART
UART
Host
Host
Figure 32. Test the Prototype Si3018/10 Circuitry
Figure 31. Test the Prototype Modem
Si24xx
Si24xx
Rev. 0.9
C1
C1
C2
C2
Si24xx
Si24xx
Si3018
Si3018
Si3018
Si3018
Prototype System
Prototype System
Discretes
Discretes
Discretes
Discretes
To
Phone
Line
To
Phone
Line