104130-4 TE Connectivity, 104130-4 Datasheet - Page 61

• Manufacturer Part Number: 104130-4
• Description: Conn Ejector Header HDR 20 POS 2.54mm Solder RA Thru-Hole
• Manufacturer: TE Connectivity
• Type: Ejector Headerr

Specifications of 104130-4

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 20
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Pitch (mm): 2.54mm
• Number Of Contact Rows: 2
• Mounting Style: Through Hole
• Body Orientation: Right Angle
• Operating Temp Range: -65C to 105C
• Current Rating (max): 1/ContactA
• Contact Material: Copper Alloy
• Housing Material: Thermoplastic
• Housing Color: Black
• Product Height (mm): 9.14mm
• Product Length (mm): 33.02mm
• Product Depth (mm): 25.83mm
• Width: 1.300"
• Peak Reflow Compatible (260 C): No
• Terminal Type: Right Angle PCB Thru Hole
• Body Material: Thermoplastic
• Leaded Process Compatible: No
• Mounting Type: Through Hole
• Rohs Compliant: No
• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: With
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Current Rating (a): 1
• Insulation Resistance (m?): 5,000
• Termination Post Length (mm [in]): 3.43 [0.135]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Pin Header
• Number Of Positions: 20
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (30), Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Dual Polarizing Bar
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Temperature Rating: Standard
• Lead Free Status / RoHS Status: Not Compliant

ASG Servo Electric Presses
for Compliant Pin
Connectors
Tyco Electronics offers the
ASG line of servo electric
presses for the application
of compliant pin products.
Systems are available in a
wide range of pressing
forces, board size capabili-
ties and automation levels
to meet almost any applica-
tions requirements. Each
system utilizes a servo elec-
tric motor with PC control.
Coupled with force and dis-
tance monitoring and con-
trol, the entire line provides
100% quality assurance in
real-time with SPC data col-
lection capabilities.
Automatic set up and a
graphical operator interface
help provide intuitive opera-
tion to help reduce common
and costly operator errors.
Product Line Overview
Please contact the Tyco Tooling Assistance Center at 1-800-722-1111 for help with choosing the correct press and tooling to meet your application needs.
See Catalog 1309329 for more information on this equipment.
Catalog 1307819
Revised 8-08
www.tycoelectronics.com
System Type
Force Capability
Board Size Capability
are metric equivalents.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
Semi-Automatic Press
Up to 18" x 24"
[460x610 mm]
Up to 5 Tons
Benchtop
[44 kN]
BMEP
AMPMODU Interconnection System
Application Tooling for Compliant Pin Connectors
Press Force Monitoring for Scrap Avoidance
Every Tyco Electronics ASG
servo press utilizes real-
time force and distance
monitoring and control.
This allows the press to
identify an error and react
throughout the press stroke.
Common problems such as
PCB holes above\below
specification and some-
times bent pins can be
detected by monitoring both
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Semi-Automatic Press
Up to 30" x 36"
[760x915 mm]
Up to 12 Tons
Stand-Alone
[107 kN]
MEP
minimum and maximum
force parameters. Common
operator error such as
improperly placed connec-
tors, missing\incorrect con-
nector or tooling can also
be found by monitoring pre-
mature or missing force
parameters. In each case,
the system can stop during
the press cycle to avoid
costly scrap and rework.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
Automatic Press
Up to 30" x 36"
[760x915 mm]
Stand-Alone
Up to 6 Tons
AEP 6T
[53 kN]
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-8706-080-208
Inline Automatic Press
[915x1220 mm]
Stand-Alone or
Up to 36" x 48"
Up to 12 Tons
AEP 12T
[107 kN]
61
3