PIC16F1823-I/SL Microchip Technology, PIC16F1823-I/SL Datasheet - Page 123

• Manufacturer Part Number: PIC16F1823-I/SL
• Description: 3.5 KB Flash, 128 Bytes RAM, 32 MHz Int. Osc, 12 I/0, Enhanced Mid Range Core 14
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1823-I/SL

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Core: PIC
• Processor Series: PIC16F
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 32 MHz
• Data Ram Size: 128 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 12
• Number Of Timers: 3
• Operating Supply Voltage: 2.3 V to 5.5 V
• Operating Temperature Range: - 40 C to + 85 C
• A/d Bit Size: 10 bit
• A/d Channels Available: 8
• Height: 1.25 mm
• Interface Type: I2C, SPI, USART
• Length: 8.65 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.3 V
• Width: 3.9 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12.2.2
Each PORTA pin is multiplexed with other functions. The
pins, their combined functions and their output priorities
are briefly described here. For additional information,
refer to the appropriate section in this data sheet.
When multiple outputs are enabled, the actual pin
control goes to the peripheral with the lowest number in
the following lists.
Analog input functions, such as ADC, comparator and
CapSense inputs, are not shown in the priority lists.
These inputs are active when the I/O pin is set for
Analog mode using the ANSELx registers. Digital
output functions may control the pin when it is in Analog
mode with the priority shown below.
RA0
1.
2.
3.
4.
5.
6.
7.
RA1
1.
2.
3.
4.
5.
RA2
1.
2.
3.
4.
 2010 Microchip Technology Inc.
ICSPDAT
ICDDAT
DACOUT (DAC)
MDOUT (PIC12F/LF1822 only)
TX/CK (EUSART)
SDO (PIC12F/LF1822 only)
P1B (PIC12F/LF1822 only)
ICSPCLK
ICDCLK
SCL (PIC12F/LF1822 only)
RX/DT (EUSART)
SCK (PIC12F/LF1822 only)
SRQ
C1OUT (Comparator)
SDA (PIC12F/LF1822 only)
CCP1/P1A (PIC12F/LF1822 only)
PORTA FUNCTIONS AND OUTPUT
PRIORITIES
PIC12F/LF1822/PIC16F/LF1823
Preliminary
RA3
No output priorities. Input only pin.
RA4
1.
2.
3.
4.
5.
6.
7.
RA5
1.
2.
3.
4.
5.
OSC2
CLKOUT
T1OSO (Timer1 Oscillator)
CLKR
TX/CK (PIC12F/LF1822 only)
SDO
P1B (PIC12F/LF1822 only)
OSC1
T1OSI (Timer1 Oscillator)
SRNQ (PIC12F/LF1822 only)
RX/DT (PIC12F/LF1822 only)
CCP1/P1A (PIC12F/LF1822 only)
DS41413B-page 123