PIC16LF1847T-I/SO Microchip Technology, PIC16LF1847T-I/SO Datasheet - Page 81

• Manufacturer Part Number: PIC16LF1847T-I/SO
• Description: 14 KB Flash, 1K Bytes RAM, 32 MHz Int. Osc, 16 I/0, Enhanced Mid Range Core, Nan
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ mTouch™ 16Fr

Specifications of PIC16LF1847T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (0.295", 7.50mm Width)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7.11
The Power Control (PCON) register contains flag bits
to differentiate between a:
• Power-on Reset (POR)
• Brown-out Reset (BOR)
• Reset Instruction Reset (RI)
• Stack Overflow Reset (STKOVF)
• Stack Underflow Reset (STKUNF)
• MCLR Reset (RMCLR)
The PCON register bits are shown in
REGISTER 7-2:
 2011 Microchip Technology Inc.
bit 7
Legend:
HC = Bit is cleared by hardware
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5-4
bit 3
bit 2
bit 1
bit 0
R/W/HS-0/q
STKOVF
Power Control (PCON) Register
STKOVF: Stack Overflow Flag bit
1 = A Stack Overflow occurred
0 = A Stack Overflow has not occurred or set to ‘0’ by firmware
STKUNF: Stack Underflow Flag bit
1 = A Stack Underflow occurred
0 = A Stack Underflow has not occurred or set to ‘0’ by firmware
Unimplemented: Read as ‘0’
RMCLR: MCLR Reset Flag bit
1 = A MCLR Reset has not occurred or set to ‘1’ by firmware
0 = A MCLR Reset has occurred (set to ‘0’ in hardware when a MCLR Reset occurs)
RI: RESET Instruction Flag bit
1 = A RESET instruction has not been executed or set to ‘1’ by firmware
0 = A RESET instruction has been executed (set to ‘0’ in hardware upon executing a RESET instruction)
POR: Power-on Reset Status bit
1 = No Power-on Reset occurred
0 = A Power-on Reset occurred (must be set in software after a Power-on Reset occurs)
BOR: Brown-out Reset Status bit
1 = No Brown-out Reset occurred
0 = A Brown-out Reset occurred (must be set in software after a Power-on Reset or Brown-out Reset
R/W/HS-0/q
STKUNF
occurs)
PCON: POWER CONTROL REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
U-0
—
Register
7-2.
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
-m/n = Value at POR and BOR/Value at all other Resets
q = Value depends on condition
R/W/HC-1/q
HS = Bit is set by hardware
RMCLR
R/W/HC-1/q
PIC16(L)F1847
RI
R/W/HC-q/u
POR
DS41453B-page 81
R/W/HC-q/u
BOR
bit 0