STM8L152C8T6 STMicroelectronics, STM8L152C8T6 Datasheet - Page 61

• Manufacturer Part Number: STM8L152C8T6
• Description: 8 BITS MICROCONTR
• Manufacturer: STMicroelectronics
• Series: STM8L EnergyLiter

Specifications of STM8L152C8T6

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, IR, LCD, POR, PWM, WDT
• Number Of I /o: 41
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 25x12b, D/A 1x12
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-LQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STM8L15xx8, STM8L15xR6
Table 13.
byte no.
Option
OPT0
OPT1
OPT2
OPT3
OPT4
ROP[7:0] Memory readout protection (ROP)
UBC[7:0] Size of the user boot code area
PCODESIZE[7:0] Size of the proprietary code area
IWDG_HW: Independent watchdog
IWDG_HALT: Independent watchdog off in Halt/Active-halt
WWDG_HW: Window watchdog
WWDG_HALT: Window window watchdog reset on Halt/Active-halt
HSECNT: Number of HSE oscillator stabilization clock cycles
LSECNT: Number of LSE oscillator stabilization clock cycles
Option byte description
0xAA: Disable readout protection (write access via SWIM protocol)
Refer to Readout protection section in the STM8L reference manual (RM0031).
UBC[7:0] Size of the user boot code area
0x00: No UBC
0x01: Page 0 reserved for the UBC and write protected.
...
0xFF: Page 0 to 254 reserved for the UBC and write-protected.
Refer to User boot code section in the STM8L reference manual (RM0031).
0x00: No proprietary code area
0x01: Page 0 reserved for the proprietary code and read/write protected.
...
0xFF: Page 0 to 254 reserved for the proprietary code and read/write protected.
Refer to Proprietary code area (PCODE) section in the STM8L reference manual
(RM0031) for more details.
0: Independent watchdog activated by software
1: Independent watchdog activated by hardware
0: Independent watchdog continues running in Halt/Active-halt mode
1: Independent watchdog stopped in Halt/Active-halt mode
0: Window watchdog activated by software
1: Window watchdog activated by hardware
0: Window watchdog stopped in Halt mode
1: Window watchdog generates a reset when MCU enters Halt mode
0x00 - 1 clock cycle
0x01 - 16 clock cycles
0x10 - 512 clock cycles
0x11 - 4096 clock cycles
0x00 - 1 clock cycle
0x01 - 16 clock cycles
0x10 - 512 clock cycles
0x11 - 4096 clock cycles
Doc ID 17943 Rev 4
Option description
Option bytes
61/126