HSDL-3602-007 Lite-On Electronics, HSDL-3602-007 Datasheet - Page 12

• Manufacturer Part Number: HSDL-3602-007
• Description: Infrared Transceivers IR Transceiver 4.0Mb/s
• Manufacturer: Lite-On Electronics
• Type: TX/RXr
• Series: -r

Specifications of HSDL-3602-007

• Pulse Width: 1.6/4us
• Led Supply Voltage: -0.5 to 7V
• Dimensions: 12.2x4.9x4
• Peak Wavelength: 875/880nm
• Angle Of Half Sensitivity: 60/30°
• Communication Distance: 150
• Fall Time: 40/25ns
• Rise Time: 40/25ns
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Mounting: Surface Mount
• Pin Count: 10
• Operating Temp Range: -20C to 70C
• Operating Temperature Classification: Commercial
• Data Rate: 3.90625Mbps
• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 4 Mbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 250 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Idle Current, Typ @ 25° C: 2.5mA
• Link Range, Low Power: 1m
• Operating Temperature: -20°C ~ 70°C
• Orientation: Side View
• Shutdown: Yes
• Size: 12.2mm x 4.9mm x 4mm
• Standards: IrPHY 1.4
• Supply Voltage: 2.7 V ~ 3.6 V
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Compliant

12
Moisture Proof Packaging
All HSDL-3602 options are shipped in moisture proof
package. Once opened, moisture absorption begins.
IS NECESSARY
NO BAKING
YES
PERFORM RECOMMENDED
OPENED (UNSEALED)
BAKING CONDITIONS
UNITS IN A SEALED
MOISTURE-PROOF
LESS THAN 30 C,
AND LESS THAN
THAN 72 HOURS
ENVIRONMENT
OPENED LESS
PACKAGE IS
PACKAGE IS
PACKAGE
60% RH
168H
YES
NO
NO
After removal from the bag,the parts should be soldered
within 7 days if stored at recommended storage conditions.If
times longer than 168 hours are needed, the parts must be
stored in a dry box.
Baking Conditions
If the parts are not stored in dry conditions, they must
be baked before reflow to prevent damage to the parts.
Baking should be done only once.
Recommended Storage Conditions
Time from Unsealing to Soldering
After removal from the bag, the parts should be sol-
dered within 3 days if stored at the recommended
storage conditions. If times longer than 72 hours are
needed, the parts must be stored in a dry box.
Package
In reels
In bulk
Storage
Temperature
Relative
Humidity
Temp.
60°C
100°C
125°C
150°C
10°C to 30°C
below 60% RH
Time
≥ 48 hours
≥ 4 hours
≥ 2 hours
≥ 1 hour