HSDL-3602-007 Lite-On Electronics, HSDL-3602-007 Datasheet - Page 22

• Manufacturer Part Number: HSDL-3602-007
• Description: Infrared Transceivers IR Transceiver 4.0Mb/s
• Manufacturer: Lite-On Electronics
• Type: TX/RXr
• Series: -r

Specifications of HSDL-3602-007

• Pulse Width: 1.6/4us
• Led Supply Voltage: -0.5 to 7V
• Dimensions: 12.2x4.9x4
• Peak Wavelength: 875/880nm
• Angle Of Half Sensitivity: 60/30°
• Communication Distance: 150
• Fall Time: 40/25ns
• Rise Time: 40/25ns
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Mounting: Surface Mount
• Pin Count: 10
• Operating Temp Range: -20C to 70C
• Operating Temperature Classification: Commercial
• Data Rate: 3.90625Mbps
• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 4 Mbit/s
• Transmission Distance: 1.5 m
• Radiant Intensity: 250 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Maximum Rise Time: 40 ns, 25 ns
• Maximum Fall Time: 40 ns, 25 ns
• Maximum Forward Current: 165 mA
• Operating Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Idle Current, Typ @ 25° C: 2.5mA
• Link Range, Low Power: 1m
• Operating Temperature: -20°C ~ 70°C
• Orientation: Side View
• Shutdown: Yes
• Size: 12.2mm x 4.9mm x 4mm
• Standards: IrPHY 1.4
• Supply Voltage: 2.7 V ~ 3.6 V
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Compliant

22
(B) HSDL-3602 Interoperability with National Semiconduc-
tor PC97338VJG SIO Evaluation R eport
Introduction
The objective of this report is to demonstrate the in-
teroperability of the HSDL-3602 IR transceiver IR mod-
ule as wireless communication ports at the speed of 2.4
kb/s - 4 Mb/s with NS’s PC97338VJG Super I/O under
typical operating conditions.
Test Procedures
(1)
Please refer to the National Semiconductor data sheets and application notes for updated information.
PC97/87338VJG
PC87308VUL
PC87108AVHG
PC87109VBE
SEMICONDUCTOR
IR CONTROLLER
NATIONAL
SUPER I/O
Two PC97338VJG evaluation boards were con-
nected to the ISA Bus of two PCs (Pentium 200
MHz) running Microsoft’s DOS operating system.
One system with an HSDL-3602 IR transceiver
connected to the PC97338VJG evaluation board
will act as the master device. Another system with
an HSDL-3602 IR transceiver connected to the
PC97338VJG will act as the slave device (i.e. De-
vice Under Test).
OR
HSDL-3602 FUNCTIONAL DIAGRAM (A)
IRRX1
IRSL0
IRTX
* MODE GROUND FOR
FULL POWER OPERATION
*
FIR_SEL (3)
TXD (9)
MD0 (4)
MD1 (5)
RXD (8)
*
GND (7)
FUNCTIONAL BLOCK DIAGRAM
IRTX
63
81
39
15
HSDL-3600
HSDL-3602
V
CC
AGND (2)
SP
LEDA (10)
R1
CX1
CX2
(2)
(3)
V
CC
(1)
IRRX1
65
80
38
16
The test software used in this interoperability test
is provided by National Semiconductor. A file size
of 1.7M byte from the master device, with the
PC97338VJG performing the framing, encoding is
transmitted to the slave device. The slave device,
with the PC97338VJG performing the decoding,
and CRC checksum, will receive the file. The file is
then checked for error by comparing the received
file with the original file using the DOS “fc” com-
mand.
The link distance is measured by adjusting the dis-
tance between the master and slave for errorless
data communications.
IRSL0
66
79
37
14