PSD813F2-A-70J STMicroelectronics, PSD813F2-A-70J Datasheet - Page 29

• Manufacturer Part Number: PSD813F2-A-70J
• Manufacturer: STMicroelectronics

Specifications of PSD813F2-A-70J

• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Operating Temperature Classification: Commercial
• Package Type: PLCC
• Mounting: Surface Mount
• Pin Count: 52
• Lead Free Status / RoHS Status: Compliant

PSD8XXFX
8. The MCU cannot invoke these instructions while executing code from the same Flash memory as that for which the
9. Additional sectors to be erased must be written at the end of the Sector Erase instruction within 80 µs.
10. The system may perform READ and Program cycles in non-erasing sectors, read the Flash ID or read the Sector Protection
11. The Resume Sector Erase instruction is valid only during the Suspend Sector Erase mode.
12. The Unlock Bypass instruction is required prior to the Unlock Bypass Program instruction.
13. The Unlock Bypass Reset Flash instruction is required to return to reading memory data when the device is in the Unlock
instruction is intended. The MCU must fetch, for example, the code from the secondary Flash memory when reading the
Sector Protection Status of the primary Flash memory.
Status when in the Suspend Sector Erase mode. The Suspend Sector Erase instruction is valid only during a Sector Erase
cycle.
Bypass mode.
Doc ID 7833 Rev 7
Detailed operation
29/128