5962-87664012A QP SEMICONDUCTOR, 5962-87664012A Datasheet - Page 15

• Manufacturer Part Number: 5962-87664012A
• Manufacturer: QP SEMICONDUCTOR

Specifications of 5962-87664012A

• Lead Free Status / RoHS Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
or approved alternatives shall be as specified in the device manufacturer's QM plan in accordance with MIL-PRF-38535. The
test circuit shall be maintained under document revision level control by the device manufacturer's TRB in accordance with
MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon request. The test circuit shall specify the
inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1005 of
MIL-STD-883.
4.4.2 Group C inspection. The group C inspection end-point electrical parameters shall be as specified in table II herein.
4.4.2.1 Additional criteria for device class M. Steady-state life test conditions, method 1005 of MIL-STD-883:
4.4.2.2 Additional criteria for device classes Q and V. The steady-state life test duration, test condition and test temperature,
4.4.3 Group D inspection. The group D inspection end-point electrical parameters shall be as specified in table II herein.
a.
b.
c.
Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify the
inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1005 of
MIL-STD-883.
T
Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.
DEFENSE SUPPLY CENTER COLUMBUS
A
= +125°C, minimum.
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
Interim electrical
Final electrical
Group A test
Group C end-point electrical
Group D end-point electrical
Group E end-point electrical
parameters (see 4.2)
parameters (see 4.2)
requirements (see 4.4)
parameters (see 4.4)
parameters (see 4.4)
parameters (see 4.4)
1/ PDA applies to subgroup 1.
2/ PDA applies to subgroups 1 and 7.
STANDARD
Test requirements
TABLE II. Electrical test requirements.
method 5005, table I)
(in accordance with
MIL-STD-883,
1/ 1, 2, 3, 7,
1, 2, 3, 4, 7,
8, 9, 10, 11
Subgroups
1, 2, 3
1, 2, 3
1, 7, 9
class M
Device
8, 9
- - -
SIZE
A
1/ 1, 2, 3, 7,
1, 2, 3, 4, 7,
8, 9, 10, 11
8, 9, 10, 11
1, 2, 3
1, 2, 3
1, 7, 9
class Q
Device
- - -
MIL-PRF-38535, table III)
REVISION LEVEL
(in accordance with
Subgroups
C
2/ 1, 2, 3, 7,
1, 2, 3, 4, 7,
1, 2, 3, 7, 8,
8, 9, 10, 11
8, 9, 10, 11
class V
Device
9, 10, 11
1, 2, 3
1, 7, 9
1
SHEET
5962-87664
15