UJA1065TW/3V0 NXP Semiconductors, UJA1065TW/3V0 Datasheet - Page 20

• Manufacturer Part Number: UJA1065TW/3V0
• Description: Network Controller & Processor ICs HI SPEED CAN SYSTEM
• Manufacturer: NXP Semiconductors

Specifications of UJA1065TW/3V0

• Number Of Transceivers: 1
• Power Down Mode: Standby
• Operating Supply Voltage (min): 5.5V
• Supply Current: 10mA
• Operating Temperature (max): 125C
• Operating Temperature (min): -40C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Product: Controller Area Network (CAN)
• Data Rate: 20 Kbps
• Supply Voltage (max): 27 V, 52 V
• Supply Voltage (min): 5.5 V
• Supply Current (max): 10 mA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: HTSSOP EP
• Lead Free Status / RoHS Status: Compliant
• Other names: UJA1065TW/3V0,512

NXP Semiconductors
UJA1065_7
Product data sheet
Fig 8.
RXDC: wake-up (active LOW)
SPLIT: ON/OFF (CSC/V2D)
V2: ON/OFF (V2C/V2D)
States of the CAN transceiver
On-line mode
transmitter: OFF
CPNC = 0
6.7.1.1 Active mode
Normal mode OR Flash mode
CAN wake-up filter passed
AND CMC = 1
AND CPNC = 0
In Active mode the CAN transceiver can transmit data to and receive data from the
CAN-bus. To enter Active mode the CMC bit must be set in the Physical Layer register
and the SBC must be in Normal mode or Flash mode. In Active mode voltage regulator V2
is activated automatically.
The CTC bit can be used to set the CAN transceiver to a Listen-only mode. The
transmitter output stage is disabled in this mode.
After an overload condition on voltage regulator V2, the CTC bit must be cleared for
reactivating the CAN transmitter.
power-on
AND CMC = 0 AND CPNC = 0
Normal mode OR Flash mode
no activity for t > t
global wake-up message detected
RXDC: bit stream/HIGH (V2D)
off-line
SPLIT: ON/OFF (CSC/V2D)
transmitter: ON/OFF (CTC)
V2: ON/OFF (V2C/V2D)
V2: ON/OFF (V2D)
Rev. 07 — 25 February 2010
Off-line mode
transmitter: OFF
Active mode
CPNC = 0 or 1
CPNC = 0 or 1
OR CPNC = 0
SPLIT: OFF
CPNC = 1
RXDC: V1
Normal mode OR Flash mode
CAN wake-up filter passed
AND CPNC = 1
AND CMC = 1
High-speed CAN/LIN fail-safe system basis chip
AND CMC = 0 AND CPNC = 1
Normal mode OR Flash mode
no activity for t > t
SPLIT: ON/OFF (CSC/V2D)
On-line Listen mode
V2: ON/OFF (V2C/V2D)
off-line
transmitter: OFF
RXDC: V1
CPNC = 1
001aad182
UJA1065
© NXP B.V. 2010. All rights reserved.
OR Flash mode
AND CMC = 1
Normal mode
20 of 76