320576 TE Connectivity, 320576 Datasheet - Page 3

• Manufacturer Part Number: 320576
• Description: TERMINAL,PIDG R 12-10 5/16
• Manufacturer: TE Connectivity
• Type: Ring Tongue Terminalr
• Series: 320r

Specifications of 320576

• Rohs Compliant: YES
• Stud Size: 7.94mm
• Wire Gauge: 10-12
• Body Plating: Tin
• Body Material: Copper
• Insulation: Nylon
• Product Depth (mm): 13.49mm
• Product Length (mm): 33.58mm
• Color: Yellow
• Angle: Straight
• Brand/series: PIDG
• Contact Plating: Tin
• Diameter, Insulation: 0.230 "
• Insulation Type: Nylon
• Length, Overall: 1.322 "
• Material, Contact: Copper
• Primary Type: Ring
• Size, Stud: 5⁄16 "
• Width, Overall: 0.531 "
• Wire Size: 12-10 AWG
• Product: Rings
• Wire Size (awg): 12-10
• Stud / Tab Size: 5/16 (M8)
• Gender: Female
• Contact Material: Copper
• Insulation Material: Nylon
• Voltage Rating: 300 VAC
• Terminal Shape: Ring Tongue
• Receptacle Style: Straight
• Body Style: PIDG
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation Support: Insulation Support
• Insulation Diameter (mm [in]): 5.84 [.230] Max.
• Stud Diameter (mm [in]): 7.92 [0.312]
• Shape: RING-041
• Heavy Duty: No
• Finish: Tin
• Voltage (vac): 300
• Wire/cable Size (cma): 5,180 – 13,100
• Wire Range (mm [awg]): 3.00-6.00² [12-10]
• Tongue Material Thickness (mm [in]): 1.07 [0.042]
• Class: 1 & 2
• Government/industry Qualification: Yes
• Government/industry Part Number: MS25036-113
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

3. REQUIREMENTS
3.1. Limitation
These terminals and end caps are suitable for 300 volts maximum, and the splices are suitable for 600 volts
maximum.
The terminals, splices, and end caps having the following insulation can withstand the following temperature
range:
3.2. Storage
3.3. Wire Selection and Preparation
Terminals and splices accept solid and/or stranded wire sizes 26 through 10 AWG and end caps accept solid
and/or stranded wire sizes 22 through 10 AWG. The wire size used must be within the range stamped on the
underside of the terminal tongue or on the center of the splice or end cap. Generally, the strip length of the wire
should be equal to the wire barrel length plus 0.76 [.030]. Specific strip lengths are given in Figure 2.
Rev
NOTE
408–2823
408–3295
408–4099
408–4105
408–7424
408–8044
408–8053
408–8082
408–8088
408–9252
408–9491
408–9586
408–9640
408–9816
409–1993
409–5842
409–5862
409–5878
nylon –40 to 105 C [–40 to 221 F]
PVC –10 to 90 C [14 to 194 F]
PVF
D
A. Ultraviolet Light
Prolonged exposure to ultraviolet light may deteriorate the chemical composition used in the insulation.
B. Reel Storage
Tape–mounted reeled product should be stored horizontally to prevent sagging and possible stretching or
distortion of the plastic tape which could adversely affect feeding of the product through the tooling.
C. Shelf Life
The product should remain in the shipping containers until ready for use to prevent inadvertent damage.
The product should be used on a first in, first out basis to avoid storage contamination that could adversely
affect signal transmissions.
D. Chemical Exposure
Do not store product near chemicals listed below. They could cause stress corrosion cracking of product.
Alkalies
Amines
2
–65 to 150 C [–149 to 302 F]
The wire conductor(s) must not be nicked, scraped, or cut during the stripping operation.
TETRA–CRIMP* Hand Crimping Tool 59824–1
Preparing (Reel–Wrap) Reel of Contacts for Applicator Tooling
Pneumatic TETRA–CRIMP Adapter 679305–1
626 Straight Action Crimper 217200–[ ]
Checking Terminal Crimp Height or Gaging Die Closure
Miniature Quick–Change Applicator for Tape–Mounted Closed Barrel Terminals
Miniature Quick–Change Applicators
Miniature Quick–Change Applicators (Side–Feed Type) with Air Feed
Applicator 818057–2
PRO–CRIMPER* Hand Crimping Tool 58433–3
AUTO–PRO* Terminating Machine 818380–1
Pneumatic Crimping Heads 314269–1, 314270–3, and 314537–1
Crimp Quality Monitor Applicators for Side–Feed and End–Feed Applications
Handling of Reeled Products
AMP–TAPETRONIC* Machine 69875
AMP–O–LECTRIC* Model “G” Terminating Machine 354500–1
626 Pneumatic Tooling Assemblies 189721–[ ]
AMPOMATOR* CLS IV+ Lead–Making Machines 356500–[ ]
Ammonia
Carbonates
PIDG Terminals, Splices, and End Caps
Citrates
Nitrites
Phosphates Citrates
Sulfur Nitrites
Sulfur Compounds
Tartrates
114-2157
3
of 14