ADF4360-2BCPZ Analog Devices Inc, ADF4360-2BCPZ Datasheet - Page 17

• Manufacturer Part Number: ADF4360-2BCPZ
• Description: IC SYNTHESIZER/VCO 24-LFCSP
• Manufacturer: Analog Devices Inc
• Type: Fanout Distribution, Integer N Synthesizer (RF)r

Specifications of ADF4360-2BCPZ

• Pll: Yes
• Input: CMOS
• Output: Clock
• Number Of Circuits: 1
• Ratio - Input:output: 1:2
• Differential - Input:output: No/No
• Frequency - Max: 2.17GHz
• Divider/multiplier: Yes/No
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-LFCSP
• Frequency-max: 2.15GHz
• Pll Type: Frequency Synthesis
• Frequency: 2.17GHz
• Supply Current: 10mA
• Supply Voltage Range: 3V To 3.6V
• Digital Ic Case Style: LFCSP
• No. Of Pins: 24
• Operating Temperature Range: -40°C To +85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: EVAL-ADF4360-2EBZ1 - BOARD EVALUATION FOR ADF4360-2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Hardware Power-Up/Power-Down
If the ADF4360-2 is powered down via the hardware (using the
CE pin) and powered up again without any change to the N
counter register during power-down, the part locks at the
correct frequency because it is already in the correct frequency
band. The lock time depends on the value of capacitance on the
C
capacitance of 440 nF on this pin enables lock times of <600 μs.
The N counter value cannot be changed while it is in power-
down because it may not lock to the correct frequency on
power-up. If it is updated, the correct programming sequence
for the part after power-up is to the R counter latch, followed by
the control latch, and finally the N counter latch, with the
required interval between the control latch and N counter latch,
as described in the Initial Power-Up section.
N
pin, which is <5 ms for 10 μF capacitance. The smaller
Rev. B | Page 17 of 24
Software Power-Up/Power-Down
If the ADF4360-2 is powered down via the software (using the
control latch) and powered up again without any change to the
N counter latch during power-down, the part locks at the
correct frequency because it is already in the correct frequency
band. The lock time depends on the value of capacitance on the
C
capacitance of 440 nF on this pin enables lock times of <600 μs.
The N counter value cannot be changed while the part is in
power-down because it may not lock to the correct frequency
on power-up. If it is updated, the correct programming
sequence for the parts after power-up is to the R counter latch,
followed by the control latch, and finally the N counter latch,
with the required interval between the control latch and N
counter latch, as described in the Initial Power-Up section.
N
pin, which is <5 ms for 10 μF capacitance. The smaller
ADF4360-2