AD9265BCPZ-80 Analog Devices Inc, AD9265BCPZ-80 Datasheet - Page 39

• Manufacturer Part Number: AD9265BCPZ-80
• Description: IC ADC 16BIT 80MSPS 48LFCSP
• Manufacturer: Analog Devices Inc

Specifications of AD9265BCPZ-80

• Data Interface: Serial, SPI™
• Number Of Bits: 16
• Sampling Rate (per Second): 80M
• Number Of Converters: 1
• Power Dissipation (max): 258mW
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-VFQFN, CSP Exposed Pad
• Resolution (bits): 16bit
• Sampling Rate: 80MSPS
• Input Channel Type: Differential
• Supply Voltage Range - Analog: 1.7V To 1.9V
• Supply Voltage Range - Digital: 1.7V To 1.9V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MEMORY MAP REGISTER DESCRIPTIONS
For additional information about functions controlled in
Register 0x00 to Register 0xFF, see AN-877 Application Note,
Interfacing to High Speed ADCs via SPI.
Sync Control (Register 0x100)
Bits[7:3]—Reserved
These bits are reserved.
Bit 2—Clock Divider Next Sync Only
If the master sync enable bit (Address 0x100, Bit 0) and the
clock divider sync enable bit (Address 0x100, Bit 1) are high, Bit 2
allows the clock divider to sync to the first sync pulse it receives
Rev. A | Page 39 of 44
and to ignore the rest. The clock divider sync enable bit (Address
0x100, Bit 1) resets after it syncs.
Bit 1—Clock Divider Sync Enable
Bit 1 gates the sync pulse to the clock divider. The sync signal is
enabled when Bit 1 is high and Bit 0 is high. This is continuous
sync mode.
Bit 0—Master Sync Enable
Bit 0 must be high to enable any of the sync functions. If the
sync capability is not used, this bit should remain low to
conserve power.
AD9265