N25Q128A11B1240E NUMONYX, N25Q128A11B1240E Datasheet - Page 166

• Manufacturer Part Number: N25Q128A11B1240E
• Manufacturer: NUMONYX

Specifications of N25Q128A11B1240E

• Cell Type: NOR
• Density: 128Mb
• Access Time (max): 7ns
• Interface Type: Serial (SPI)
• Boot Type: Bottom
• Address Bus: 1b
• Operating Supply Voltage (typ): 1.8V
• Operating Temp Range: -40C to 85C
• Package Type: TBGA
• Program/erase Volt (typ): 1.7 to 2/8.5 to 9.5V
• Sync/async: Synchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 1.7V
• Operating Supply Voltage (max): 2V
• Word Size: 8b
• Number Of Words: 16M
• Supply Current: 20mA
• Mounting: Surface Mount
• Pin Count: 24
• Lead Free Status / Rohs Status: Supplier Unconfirmed

10.4
166/185
XIP Memory reset after a controller reset
If during the application life the system controller is reset during operation, and the device
features the RESET functionality (in devices with a dedicated part number), and the feature
has not been disabled, after the controller resets, the memory returns to POR state and
there is no issue. See
In all the other cases, it is possible to exit the memory from the XIP mode by sending the
following rescue sequence at the first chip selection after a system reset:
DQ0= '1' for:
7 clock cycles within S low (S becomes high before 8th clock cycle)
+ 13 clock cycles within S low (S becomes high before 14th clock cycle)
+ 25 clock cycles within S low (S becomes high before 26th clock cycle)
The global effect is only to exit from XIP without any other reset.
Section 16: Ordering
information.