ATF1508RE-7AU100 Atmel, ATF1508RE-7AU100 Datasheet - Page 19

• Manufacturer Part Number: ATF1508RE-7AU100
• Description: IC CPLD EE 128MC 5NS 100-TQFP
• Manufacturer: Atmel
• Series: ATF1508REr

Specifications of ATF1508RE-7AU100

• Programmable Type: In System Programmable (min 10K program/erase cycles)
• Delay Time Tpd(1) Max: 7.5ns
• Voltage Supply - Internal: 3 V ~ 3.6 V
• Number Of Macrocells: 128
• Number Of I /o: 80
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Features: Programmable
• Voltage: 1.8V, 2.5V, 3.3V
• Memory Type: EEPROM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Logic Elements/cells: -

Atmel-ISP Software
3.1.4
3.1.5
3-8
Description of
ATMISP View Menu
Commands
Description of
ATMISP Process
Menu Commands
View Chain
File
Log File
Run
Use this command to view the contents of a chain file. The chain file
will show the following information:


















The View Chain File command gives you a snapshot of all the device
information stored in the chain file before you execute it. Make sure
that this compares exactly to the ISP device(s) in the hardware chain.
If there are discrepancies, use the Edit Device, Add Device or Delete
Device command to modify the chain file.
Atmel recommends that you view your chain file prior to executing it.
This will assure that you are programming the right device with the
right instruction in the correct order on your JTAG hardware chain.
This command opens a log file that shows you the status of all ISP
operations after they were executed in your chain file. For example, if
you executed a programming operation, it will indicate whether it
passed or failed and the checksum read from the device. For other
operations not involving a JEDEC file, the log file will indicate success
or failure of the ISP operation.
This command executes the operations specified in your chain file. If
there is more than one device specified in your chain file, the ISP soft-
ware will execute the same operation on all devices in parallel.
You cannot mix different ISP operations on different devices. For
example, you cannot erase one device while verifying another. If you
do so, the ISP software will generate an error. However, you can exe-
cute the same ISP operation on several devices while putting other
devices in the Bypass mode.
Do not execute the Verify Secure command on more than one device.
It will generate incorrect results.
The chain file name
The parallel port used (e.g., Port 1 corresponds to LPT1)
The cable type used (if the ByteBlaster/ByteBlasterMV cable type
is selected)
The calibration value
The device number (position of device in the JTAG hardware chain)
The device type
JEDEC file used for each device (if appropriate)
ISP operation performed for each device
Warning message indicating the IDCODE box has not been
checked in the Device Properties dialog box for an Atmel device
(this only appears when the IDCODE box has not been checked in
the Device Properties dialog box for an Atmel device)
Atmel ATF15xx Family: ISP Devices User Guide