ATF1508RE-7AU100 Atmel, ATF1508RE-7AU100 Datasheet - Page 8

• Manufacturer Part Number: ATF1508RE-7AU100
• Description: IC CPLD EE 128MC 5NS 100-TQFP
• Manufacturer: Atmel
• Series: ATF1508REr

Specifications of ATF1508RE-7AU100

• Programmable Type: In System Programmable (min 10K program/erase cycles)
• Delay Time Tpd(1) Max: 7.5ns
• Voltage Supply - Internal: 3 V ~ 3.6 V
• Number Of Macrocells: 128
• Number Of I /o: 80
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Features: Programmable
• Voltage: 1.8V, 2.5V, 3.3V
• Memory Type: EEPROM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Logic Elements/cells: -

1.3.2
Atmel ATF15xx Family: ISP Devices User Guide
JTAG Interface with
Atmel-WinCUPL
1. Double-click on the Device icon in the Sources section of the Project Naviga-
2. Click once on Atmel PLDs. Click on the down arrow to scroll through the device
3. Click once on the appropriate Atmel ISP device type to select the device for your
4. Click OK to close the Choose Device dialog box. If the Confirm Change dialog
5. Double-click Fit Design in the Processes window to run the Fit Design process.
Note:
To enable the JTAG interface with Atmel-WinCUPL and CUPL Total Designer
from Logical Devices, you’ll need to select an Atmel ISP device type first. You can then
change the fitter property settings to enable the TDI and TMS internal pull-ups, or other
options. For example, pin-keeper circuits.
Note:
1. For Atmel-WinCUPL V4.8, click once on Options from the main menu, then click
2. Choose the appropriate Atmel ISP device. Refer to Table 1-2 for a device type
Note:
3. Click OK to close the device selection menu.
4. Click once on File from the Atmel-WinCUPL main menu, then click once on
5. Click OK to open the PLD source file.
6. Click once on File from the Atmel-WinCUPL main menu, then click once on
7. Click once on Run from the Atmel-WinCUPL main menu, then click once on
tor. The Choose Device dialog box will open.
list.
design. Refer to Table 1-2 for a list of Atmel ISP device types to choose from.
box appears, click Yes to close it.
If the design fits, the fitter will generate a JEDEC file which, when programmed
into the device, will keep the JTAG interface enabled and (optionally) enable the
internal TMS and TDI pull-ups and pin-keeper circuits.
once on Select Device. This will open the Select Device dialog box.
For Atmel-WinCUPL V5.1, click once on Options from the main menu, then click
once on Compiler. This will open the Compiler Options dialog box. Click once on
the Device tab to go to the device selection menu.
listing for Atmel-WinCUPL.
Open. Select your PLD source file from the appropriate working directory.
Save. This will save any changes you made to the source file.
Device Specific Compile (for V4.8) or Device Dependent Compile (for V5.1).
Selecting an Atmel ISP device type will automatically enable the JTAG interface
by default when Atmel-Synario runs the Atmel device fitter.
If you use an Atmel ISP device type for a design that uses the JTAG interface
pins as logic I/O pins, Atmel-WinCUPL will generate an error.
An alternate method is to choose an appropriate Atmel ISP device type from
Table 1-2 and include it in the header section of your PLD source file.
Introduction
™
software
1-5