ATF1508RE-7AU100 Atmel, ATF1508RE-7AU100 Datasheet - Page 4

• Manufacturer Part Number: ATF1508RE-7AU100
• Description: IC CPLD EE 128MC 5NS 100-TQFP
• Manufacturer: Atmel
• Series: ATF1508REr

Specifications of ATF1508RE-7AU100

• Programmable Type: In System Programmable (min 10K program/erase cycles)
• Delay Time Tpd(1) Max: 7.5ns
• Voltage Supply - Internal: 3 V ~ 3.6 V
• Number Of Macrocells: 128
• Number Of I /o: 80
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Features: Programmable
• Voltage: 1.8V, 2.5V, 3.3V
• Memory Type: EEPROM
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Logic Elements/cells: -

Atmel ATF15xx Family: ISP Devices User Guide
Traditionally, programmable logic devices have been programmed on external device
programmers that provide the necessary programming signals and algorithms to pro-
gram the devices. With the advent of In-System Programming (ISP), ISP devices can
now be programmed on your own circuit board. This manual describes the design meth-
ods and requirements for implementing in-system Programming on Atmel ISP Complex
Programmable Logic Devices (CPLDs). All devices in the ATF15xx family are ISP capa-
ble CPLDs (except ATF1500/A/AL/ABV), and ISP is implemented on these devices
through the Joint Test Action Group (JTAG) interface. The following devices are sup-
ported by the Atmel-ISP software.
• ATF1502AS/ASL/ASV/ASVL
• ATF1504AS/ASL/ASV/ASVL
• ATF1508AS/ASL/ASV/ASVL
The three essential components for in-system programming are the Atmel-ISP software,
ISP hardware board and ISP download cable. These components and their usage will
be discussed in detail in this user guide.
In addition to these three components, a JEDEC file is also necessary to program any
Atmel ISP devices. This JEDEC file can be created by compiling a design file using a
compiler software that supports the Atmel ISP devices. Atmel also provides translator
software (POF2JED.EXE) to convert output files from the competitor’s programming for-
mat to a JEDEC file compatible with the Atmel ISP family of devices. This conversion
utility is available on Atmel’s web site and BBS. For further information on POF2JED,
please refer to the application note, “ATF15xx Product Family Conversion”, available on
Atmel’s web site, BBS and Fax-on-Demand. After you have created the JEDEC files for
all Atmel ISP devices, you are ready to program them on your circuit/Atmel-ISP board.
Using the Atmel-ISP software, download cable and ISP hardware board, you can pro-
gram, verify, blank check, erase, secure and read from any Atmel ISP device directly
from your personal computer while the devices are still on the circuit boards.
URL:
BBS:
Fax-on-Demand: 1-800-29-ATMEL/1-800-292-8635 (North America)
www.atmel.com
1-408-436-4309
1-408-441-0732 (International)
Introduction
Section 1
Rev. 1936A-07/01
1-1