20-101-1094 Rabbit Semiconductor, 20-101-1094 Datasheet - Page 58

• Manufacturer Part Number: 20-101-1094
• Description: MCU RCM4000 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1094

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet, Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit, 1 x 16 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 47 mm x 61 mm x 20 mm
• Core: RCM4000
• Processor Series: RCM4000
• Cpu Core: Rabbit 4000
• For Use With/related Products: RCM4000
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1139

PARAMETERS
RETURN VALUE
SEE ALSO
52
instructionbyte the instruction byte that will initiate a read or write operation
cmd
brate
0 on write operations
data value on read operations
anaInDriver, anaIn, brdInit
anaInConfig (continued)
at 8 or 16 bits on the designated register address. For example,
the command data that configure the registers addressed by the in-
struction byte. Enter 0 if you are performing a read operation. For
example,
the serial clock transfer rate of 9600 to 115,200 bytes per second.
brate must be set the first time this function is called. Enter 0 for
this parameter thereafter, for example,
checkid = anaInConfig(0x5F, 0, 9600);
i = anaInConfig(0x07, 0x3b, 0);
anaInConfig(0x00, 0x00, 9600);
// read ID and set baud rate
// write ref/osc reg and enable
// resets device and sets byte rate
RabbitCore RCM4000