CY7C64613-80NC Cypress Semiconductor Corp, CY7C64613-80NC Datasheet - Page 7

• Manufacturer Part Number: CY7C64613-80NC
• Description: IC MCU USB EZ FX 8K RAM 80-PQFP
• Manufacturer: Cypress Semiconductor Corp
• Series: EZ-USB FX™r

Specifications of CY7C64613-80NC

• Applications: USB Microcontroller
• Core Processor: 8051
• Program Memory Type: ROMless
• Controller Series: CY7C646xx
• Ram Size: 8K x 8
• Interface: I²C, USB, USART
• Number Of I /o: 32
• Voltage - Supply: 3 V ~ 3.6 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 80-MQFP, 80-PQFP
• For Use With: 428-1339 - KIT LOW SPEED PERSONALITY BOARD
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 428-1312

Endpoint data is serviced either directly by the 8051, or moved on or off-chip using the DMA system built into the CY7C646xx.
Bulk data is available in 64-byte random-access buffers that can also be addressed as a FIFO using the special AutoPointer
feature. Each endpoint has a unique interrupt vector. This allows ISRs (Interrupt Service Routines) automatically to be called with
minimum overhead and latency, simply by including the ISR address in an interrupt jump table.
2.4
When the CY7C64613 is plugged into USB with no EEPROM attached to its I
installed), the intelligent SIE enumerates as a generic USB device with the following characteristics:
Default Endpoints
Powering up with default USB characteristics allows code to be written without initial consideration of the enumeration code that
establishes the default USB device, speeding the learning process.
2.5
The CY7C646xx has an interrupt that indicates that an IN token has been received by an endpoint, and the SIE has NAK’d the
transfer due to no data being available in the endpoint buffer. Interrupt request bits are provided for endpoints EP1N through
EP7IN, and a previously reserved vector is added to the USB vectored interrupts.
2.6
Many high-bandwidth USB designs use a FIFO between the USB interface chip and external logic to match data rates, or to
smooth the USB data delivery (which, being packet oriented, occurs in bursts). The CY7C646xx moves this glue logic into the
part by providing four 64-byte internal slave FIFOs. The FIFOs also provide two important interface functions, external clocking
and bus width conversion.
Using external clocking, external logic (such as a DSP or ASIC) can clock data into or out of the slave FIFOs under control of its
own clock, rather than synchronizing with the clock supplied by the CY7C646xx (24 or 48 MHz). The FIFOs can be controlled
Document #: 38-08005 Rev. **
Endpoint
0
1 IN
2 IN
2 OUT
4 IN
4 OUT
6 IN
6 OUT
8 IN
8 OUT
9 IN
9 OUT
10 IN
10 OUT
Default USB Machine
IBN (In-Bulk-NAK) Interrupts
Slave FIFOs
PID (Product ID)
VID (Vendor ID)
DID (Device ID)
Type
CTL
INT
BULK
BULK
BULK
BULK
BULK
BULK
ISO
ISO
ISO
ISO
ISO
ISO
ID bytes (hex)
Alternate Setting
0
Max Packet Size (bytes)
64
0
0
0
0
0
0
0
0
0
0
0
0
0
1
64
16
64
64
64
64
64
64
16
16
16
16
16
16
0547
2235
0000
2
64
64
64
64
64
64
64
64
256
256
16
16
16
16
2
C port (but with the SCL and SDA pull-ups
CY7C64601/603/613
Page 7 of 42