MPC5200CVR400B Freescale Semiconductor, MPC5200CVR400B Datasheet - Page 74

• Manufacturer Part Number: MPC5200CVR400B
• Description: IC MPU 32BIT 400MHZ 272-PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC5200CVR400B

• Processor Type: MPC52xx PowerPC 32-Bit
• Speed: 400MHz
• Voltage: 1.5V
• Mounting Type: Surface Mount
• Package / Case: 272-PBGA
• Processor Series: MPC52xx
• Core: e300
• Development Tools By Supplier: MEDIA5200KIT1E
• Maximum Clock Frequency: 400 MHz
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• I/o Voltage: 2.5 V, 3.3 V
• Minimum Operating Temperature: - 40 C
• Core Size: 32 Bit
• No. Of I/o's: 56
• Ram Memory Size: 16KB
• Cpu Speed: 400MHz
• No. Of Timers: 8
• Embedded Interface Type: CAN, I2C, SCI, SPI
• No. Of Pwm Channels: 8
• Digital Ic Case Style: TEPBGA
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

System Design Information
5.3.2
If the PCI interface is NOT used (and internally disabled) the PCI control pins must be terminated as
indicated by the PCI Local Bus specification [4]. This is also required for MOST/Graphics and Large Flash
Mode.
PCI control signals always require pull-up resistors on the motherboard (not the expansion board) to
ensure that they contain stable values when no agent is actively driving the bus. This includes
PCI_FRAME, PCI_TRDY, PCI_IRDY, PCI_DEVSEL, PCI_STOP, PCI_SERR, PCI_PERR, and
PCI_REQ.
5.3.3
The MEM_MDQS[3:0] signals are not used with SDR memories and require pull-up or pull-down
resistors in SDRAM mode.
5.4
The MPC5200 provides the user an IEEE 1149.1 JTAG interface to facilitate board/system testing. It also
provides a Common On-Chip Processor (COP) Interface, which shares the IEEE 1149.1 JTAG port. The
COP Interface provides access to the MPC5200's imbedded Freescale (formerly Motorola) MPC603e
G2_LE processor. This interface provides a means for executing test routines and for performing software
development & debug functions.
5.4.1
Boundary scan testing is enabled through the JTAG interface signals. The JTAG_TRST signal is optional
in the IEEE 1149.1 specification but is provided on all processors that implement the PowerPC
architecture. To obtain a reliable power-on reset performance, the JTAG_TRST signal must be asserted
during power-on reset.
5.4.1.1
The JTAG interface can control the direction of the MPC5200 I/O pads via the boundary scan chain. The
JTAG module must be reset before the MPC5200 comes out of power-on reset; do this by asserting
JTAG_TRST before PORRESET is released.
For more details refer to the Reset and JTAG Timing Specification.
74
JTAG
Pull-up Requirements for the PCI Control Lines
Pull-up/Pull-down Requirements for MEM_MDQS pins
(SDRAM)
JTAG_TRST
JTAG_TRST and PORRESET
MPC5200 Data Sheet, Rev. 4
Freescale Semiconductor