ENC28J60-I/SP Microchip Technology, ENC28J60-I/SP Datasheet - Page 41
![IC ETHERNET CTRLR W/SPI 28DIP](/photos/6/59/65908/150-28-dip_sml.jpg)
ENC28J60-I/SP
Manufacturer Part Number
ENC28J60-I/SP
Description
IC ETHERNET CTRLR W/SPI 28DIP
Manufacturer
Microchip Technology
Specifications of ENC28J60-I/SP
Package / Case
28-DIP (0.300", 7.62mm)
Controller Type
Ethernet Controller, MAC/10Base-T
Interface
SPI
Voltage - Supply
3.1 V ~ 3.6 V
Current - Supply
160mA
Operating Temperature
-40°C ~ 85°C
Mounting Type
Through Hole
Input Voltage Range (max)
5.5 V
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 40 C
Mounting Style
Through Hole
Operating Supply Voltage
3.1 V to 3.6 V
Supply Current (max)
180 mA
Product
Ethernet Controllers
Standard Supported
IEEE 802.3
Data Rate
10 Mbps
Ethernet Connection Type
10Base-T
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
DM163024 - BOARD DEMO PICDEM.NET 2AC164123 - BOARD DAUGHTER ETH PICTAIL PLUSAC164121 - BOARD DAUGHTER PICTAIL ETHERNET
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ENC28J60-I/SP
Manufacturer:
MICROCHIP
Quantity:
6 500
7.0
7.1
The MAC inside the ENC28J60 will automatically gener-
ate the preamble and start-of-frame delimiter fields when
transmitting. Additionally, the MAC can generate any
padding (if needed) and the CRC if configured to do so.
The host controller must generate and write all other
frame fields into the buffer memory for transmission.
FIGURE 7-1:
© 2006 Microchip Technology Inc.
bit 7-4
bit 3
bit 2
bit 1
bit 0
TRANSMITTING AND
RECEIVING PACKETS
Transmitting Packets
Unused
PHUGEEN: Per Packet Huge Frame Enable bit
When POVERRIDE = 1:
1 = The packet will be transmitted in whole
0 = The MAC will transmit up to the number of bytes specified by MAMXFL. If the packet is larger
When POVERRIDE = 0:
This bit is ignored.
PPADEN: Per Packet Padding Enable bit
When POVERRIDE = 1:
1 = The packet will be zero padded to 60 bytes if it is less than 60 bytes
0 = The packet will be trasmitted without adding any padding bytes
When POVERRIDE = 0:
This bit is ignored.
PCRCEN: Per Packet CRC Enable bit
When POVERRIDE = 1:
1 = A valid CRC will be calculated and attached to the frame
0 = No CRC will be appended. The last 4 bytes of the frame will be checked for validity as a
When POVERRIDE = 0:
This bit is ignored.
POVERRIDE: Per Packet Override bit
1 = The values of PCRCEN, PPADEN and PHUGEEN will override the configuration defined by
0 = The values in MACON3 will be used to determine how the packet will be transmitted
bit 7
—
than MAMXFL, it will be aborted after MAMXFL is reached.
CRC.
MACON3
FORMAT FOR PER PACKET CONTROL BYTES
—
—
—
Preliminary
PHUGEEN
Additionally, the ENC28J60 requires a single per packet
control byte to precede the packet for transmission. The
per packet control byte is organized as shown in
Figure 7-1. Before transmitting packets, the MAC
registers which alter the transmission characteristics
should be initialized as documented in Section 6.0
“Initialization”.
For an example of how the entire transmit packet and
results will look in memory, see Figure 7-2.
PPADEN
PCRCEN
ENC28J60
POVERRIDE
DS39662B-page 39
bit 0