USB2241-AEZG-05 SMSC, USB2241-AEZG-05 Datasheet - Page 34

• Manufacturer Part Number: USB2241-AEZG-05
• Description: IC MEDIA CTRLR USB 2.0 36-QFN
• Manufacturer: SMSC

Specifications of USB2241-AEZG-05

• Controller Type: USB 2.0 Controller
• Interface: Serial
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 135mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 36-QFN
• For Use With: 638-1078 - EVALUATION BOARD USB2241-AEZG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 638-1077; USB2241-AEZG

Revision 2.0 (10-14-09)
7.2.5.3
7.2.5.4
7.2.5.5
7.2.5.6
7.2.5.7
7.2.5.8
BYTE
BYTE
BYTE
BYTE
BYTE
BIT
6:0
6:0
7:0
4:0
7:0
3:0
B8h-BEh: Device 2 Identifier String
BFh-C5h: Device 3 Identifier String
C6h-CDh: Inquiry Vendor String
CEh-D2h: Inquiry Product String
D3h: Dynamic Number of LUNs
D4h-D7h: Device to LUN Mapping
DYN_NUM_LUN
DEV_LUN_MAP
INQ_VEN_STR
INQ_PRD_STR
DEV2_ID_STR
DEV3_ID_STR
NAME
NAME
NAME
NAME
NAME
NAME
If bit 4 of the 1st attribute byte is set, the device will use these strings in
response to a USB inquiry command, instead of the USB descriptor
manufacturer and product ID strings.
This ID string is associated with the xD-Picture Card device.
This ID string is associated with the Secure Digital / MultiMediaCard device.
If bit 4 of the 1st attribute byte is set, the device will use these strings in
response to a USB inquiry command, instead of the USB descriptor
manufacturer and product ID strings.
These bytes are used to specify the number of LUNs the device exposes to
the host. These bytes are also used for icon sharing by assigning more than
one LUN to a single icon. This is used in applications where the device
utilizes a combo socket and the OEM wishes to have only a single icon
displayed for one or more interfaces.
If this field is set to "FF", the program assumes that you are using the default
value and icons will be configured per the default configuration.
These registers map a device controller (SD/MMC, SM, and MS) to a Logical
Unit Number (LUN). The device reports the mapped LUNs to the USB host
in the USB descriptor during enumeration. The icon installer associates
custom icons with the LUNs specified in these fields.
Setting a register to "FF" indicates that the device is not mapped. Setting all
of the DEV_LUN_MAP registers for all devices to "FF" forces the use of the
default mapping configuration. Not all configurations are valid. Valid
configurations depend on the hardware, packaging, and OEM board layout.
The number of unique LUNs mapped must match the value in the
7.2.5.7, "D3h: Dynamic Number of LUNs," on page
Ultra Fast USB 2.0 Multi-Format, SD/MMC, and MS Flash Media Controllers
DATASHEET
34
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
34.
SMSC USB224x
Section
Datasheet