DS2154L+ Maxim Integrated Products, DS2154L+ Datasheet - Page 36

• Manufacturer Part Number: DS2154L+
• Description: IC TXRX E1 1CHIP 5V ENH 100-LQFP
• Manufacturer: Maxim Integrated Products
• Type: Transceiverr

Specifications of DS2154L+

• Number Of Drivers/receivers: 1/1
• Protocol: E1
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Product: Framer
• Number Of Transceivers: 1
• Data Rate: 1.544 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current (max): 75 mA (Typ)
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Ic Interface Type: Parallel, Serial
• Supply Voltage Range: 4.75V To 5.25V
• Operating Temperature Range: 0°C To +70°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 100
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SR2: STATUS REGISTER 2 (Address = 07 Hex)
(MSB)
RMF
SYMBOL
RCMF
LOTC
TSLIP
RMF
TMF
RAF
SEC
TAF
RAF
POSITION
SR2.7
SR2.5
SR2.4
SR2.3
SR2.1
SR2.0
SR2.6
SR2.2
TMF
NAME AND DESCRIPTION
Receive CAS Multiframe. Set every 2ms (regardless if CAS
signaling is enabled or not) on receive multiframe boundaries.
Used to alert the host that signaling data is available.
Receive Align Frame. Set every 250µs at the beginning of align
frames. Used to alert the host that Si and Sa bits are available in
the RAF and RNAF registers.
Transmit Multiframe. Set every 2ms (regardless if CRC4 is
enabled) on transmit multiframe boundaries. Used to alert the
host that signaling data needs to be updated.
1-Second Timer. Set on increments of 1 second based on
RCLK. If CCR2.7 = 1, then this bit will be set every 62.5 ms
instead of once a second.
Transmit Align Frame. Set every 250µs at the beginning of
align frames. Used to alert the host that the TAF and TNAF
registers need to be updated.
Loss of Transmit Clock. Set when the TCLK pin has not
transitioned for one channel time (or 3.9µs). Will force the
LOTC pin high if enabled via TCR2.0.
Receive CRC4 Multiframe. Set on CRC4 multiframe
boundaries; will continue to be set every 2ms on an arbitrary
boundary if CRC4 is disabled.
Transmit Elastic Store Slip. Set when the elastic store has
either repeated or deleted a frame of data.
SEC
36 of 87
TAF
LOTC
RCMF
TSLIP
(LSB)