ISE30A-N01-P-L SMC Corporation, ISE30A-N01-P-L Datasheet - Page 12

• Manufacturer Part Number: ISE30A-N01-P-L
• Description: Sensor, High-Precision Digital Pressure (positive), 1-PNP Open Collector Output
• Manufacturer: SMC Corporation

Specifications of ISE30A-N01-P-L

• Display: 4-Digit, 7 Segment, 2-Color LCD (red/green)
• Function: High Precision, Digital Positive Pressure Sensor
• Ip Rating: IP 40
• Mounting Type: Panel or Bracket
• Output: 1 - PNP Open Collector
• Primary Type: Pressure
• Range, Measurement: -0.100 to 1.000 MPa
• Sensing Mode: Air, Non-Corrosive Gas, Non-Flammable Gas
• Termination: Lead Wire, Oilproof Heavy Duty Vinyl Cable
• Voltage, Supply: 12 to 24 VDC

Series
Function Details
10
The settings of the master sensor can be copied to the slave sensors.
Settings can be copied to up to 10 slave sensors at once.
(Max. transmission distance: 4 m)
Auto-preset function, when selected in the setting, calculates and stores the set-value from the measured pressure.
The optimum set-value is determined automatically by repeating vacuum and break with the target workpiece several times.
Fine adjustment of the indicated value of the pressure sensor can be
made within the range of ±5% of the read value. The scattering of
the indicated value can be eliminated.
A
B
C
It is to reduce the time taken for setting and prevent the input of wrong values.
Master-side
Master
sensor
Power
Copy function (F97)
Precision indicator setting function (F6)
Auto-preset function (F5)
Suction Verification
Atmosphere
Vacuum
Max. A
Min. B
Note) When the precision indicator setting function is used,
P
n
ZSE30A
-
-
High
1
1
the set pressure value may change ±1 digit.
±5% R.D.
Work 1
H - 1
0 Applied pressure
Released
Unit 1
Unit 1
Work 1
Displayed value at the time of shipment
Adjustable range of display calibration function
Suction
+
Work 2
(
Slave-side sensor
Unit 2
Unit 2
F
(Max. 10 units)
Work 2
)
Slave
/ISE30A
Work n
Work n
(Max. 10 units)
Unit 10
Unit n
Formula for Obtaining the Set-Value
ZS-38-5L (n + 1 pc.)
or
ZS-38-U
P_1 (P_2) = A – (A-B)/4
n_1 (n_2) = B + (A-B)/4
This function constantly detects and updates the maximum (mini-
mum) value and allows to hold the maximum (minimum) pressure
value.
When the
or longer, while “holding”, the held value will be reset.
This function prevents incorrect operations such as accidentally
changing the set-value.
This function clears and resets the zero value on the display of
measured pressure.
For the pressure switch with analog output, the analog output shifts
according to the indication. A displayed value can be adjusted within
±7% F.S. of the pressure when ex-factory. (±3.5% F.S. for ZSE30AF
(compound pressure))
D
E
F
Peak and bottom display function
Key lock function
Zero-out function
P_1 or P_2
1) The sensors are connected by a dedicated lead wire
2) Make the slave sensor which needs to be the master into
3) Press the
(ZS-38-5L (for master and one slave) or ZS-38-U (for
master and up to 10 slaves)). Copying is performed
through a dedicated communication line.
the master by button operation. (Initially all sensors are
set as slaves.)
ing.
buttons are simultaneously pressed for 1 second
button on the master sensor to start copy-
H_1 (H_2) = (A-B)/2
H_1 or H_2