ISE30A-N01-P-L SMC Corporation, ISE30A-N01-P-L Datasheet - Page 4

no-image

ISE30A-N01-P-L

Manufacturer Part Number
ISE30A-N01-P-L
Description
Sensor, High-Precision Digital Pressure (positive), 1-PNP Open Collector Output
Manufacturer
SMC Corporation
Datasheet

Specifications of ISE30A-N01-P-L

Display
4-Digit, 7 Segment, 2-Color LCD (red/green)
Function
High Precision, Digital Positive Pressure Sensor
Ip Rating
IP 40
Mounting Type
Panel or Bracket
Output
1 - PNP Open Collector
Primary Type
Pressure
Range, Measurement
-0.100 to 1.000 MPa
Sensing Mode
Air, Non-Corrosive Gas, Non-Flammable Gas
Termination
Lead Wire, Oilproof Heavy Duty Vinyl Cable
Voltage, Supply
12 to 24 VDC
Series
Specifications
Note 1) If applied pressure fluctuates near the set value, set the hysteresis above the fluctuation range to prevent chattering.
Note 2) When analog voltage output is selected, analog current output cannot be used together.
Note 3) When analog current output is selected, analog voltage output cannot be used together.
Piping Specifications
Optional Part No.
When optional parts are required separately, use the following part numbers to place an order.
2
Rated pressure range
Set pressure range
Withstand pressure
Minimum unit setting
Applicable fluid
Power supply voltage
Current consumption
Switch output
Repeatability
Hystere-
sis
Analog
output
Display
Display accuracy
Indicator light
Environ-
ment
resistance
Temperature characteristics
Lead wire
Standards
Port size
Wetted
parts
material
Weight
ZS-38-A1
ZS-38-A2
ZS-27-C
ZS-27-D
ZS-27-01
ZS-38-3L
ZS-38-4L
ZS-38-3G
ZS-38-4G
Part no.
One-touch fitting, Straight type
One-touch fitting, Elbow type
Sensor pressure receiving area
Piping port
Including lead wire with connector (3 cores, 2 m)
Including lead wire with connector (4 cores, 2 m)
Excluding lead wire with connector
Maximum load current
Maximum applied voltage
Residual voltage
Response time
Short circuit protection
Hysteresis mode
Window comparator mode
Voltage
output
Current
output
Enclosure
Operating temperature range
Operating humidity range
Withstand voltage
Insulation resistance
Vibration resistance
Impact resistance
Bracket A
Bracket B
Panel mount adapter
Panel mount adapter + Front protection cover
Front protection cover
Lead wire with connector
Lead wire with connector
Lead wire with connector (with connector cover)
Lead wire with connector (with connector cover)
Note 2)
Note 3)
ZSE30A
Model
Model
Output voltage (Rated pressure range)
Linearity
Output impedance
Output current (Rated pressure range)
Linearity
Load impedance
Option
(
F
10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 20 m/s
C3602 (electroless nickel plated)
M5 x 0.8
)
ZSE30A
R1/8
01
/ISE30A
O-ring: HNBR
Oilproof heavy-duty vinyl cable, 3 cores
10.0 to –105.0 kPa
0.0 to –101.0 kPa
Maximum load impedance: Power supply voltage 12 V: 300 Ω, Power supply voltage 24 V: 600 Ω
Minimum load impedance: 50 Ω
Mounting screw (with 2 pcs. of M3 x 5L)
Mounting screw (with 2 pcs. of M3 x 5L)
Mounting screw (with 2 pcs. of M3 x 8L)
Mounting screw (with 2 pcs. of M3 x 8L)
3 cores, for 1 output, 2 m
4 cores, for 2 outputs, 2 m
3 cores, for 1 output, 2 m
4 cores, for 2 outputs, 2 m
81 g
85 g
43 g
(Vacuum pressure)
500 kPa
0.1 kPa
NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs (selectable)
12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)
M5 x 0.8
NPT1/8
N01
Note
2.5 ms or less (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)
Operating: 0 to 50°C, Stored: –10 to 60°C (No freezing or condensation)
Lights up when switch output is turned ON. OUT1: Green, OUT2: Red
4 to 20 mA ±2.5% F.S.
50 MΩ or more between live parts and case (at 500 VDC Mega)
100 m/s
1 to 5V ±2.5% F.S.
ø5/32 inch
ø4 mm
±2% F.S. ±1 digit (Ambient temperature of 25 ±3°C)
Operating/Stored: 35 to 85% RH (No condensation)
1000 VAC for 1 minute between live parts and case
C4H
70 g
74 g
32 g
4-digit, 7-segment, 2-color LCD (Red/Green)
2
Air, Non-corrosive gas, Non-flammable gas
in X, Y, Z directions, 3 times each (Non-energized)
CE Marking, UL/CSA, RoHS compliance
1 V or less (with load current of 80 mA)
Sensor pressure receiving area: Silicon
4 cores
ZS-38-5L
ZS-38-U
ZS-38-C4H
ZS-38-C6H
ZS-38-N7H
ZS-38-C4L
ZS-38-C6L
ZS-38-N7L
ZS-38-H
ZSE30AF
PBT, POM, Stainless steel 304, C3604 (electroless nickel plated)
Part no.
Variable (0 or above)
±2% F.S. (Based on 25°C)
ø6 mm
28 V (at NPN output)
–100.0 to 100.0 kPa
–105.0 to 105.0 kPa
C6H
71 g
75 g
33 g
±0.2% F.S. ±1 digit
ø3.5, 2 m
Conductor area: 0.15 mm
±1% F.S. or less
±1% F.S. or less
40 mA or less
Approx. 1 kΩ
(Compound pressure)
500 kPa
0.1 kPa
Lead wire with a connector for copying
Lead wire unit with a connector for copying
One-touch fittings ø4 mm straight
One-touch fittings ø6 mm straight
One-touch fittings ø1/4 inch straight
One-touch fittings ø4 mm elbow
One-touch fittings ø6 mm elbow
One-touch fittings ø1/4 inch elbow
Operating manual CD-ROM
80 mA
IP40
Yes
2
acceleration, in X, Y, Z directions, for 2 hours each (Non-energized)
ø1/4 inch
N7H
73 g
77 g
35 g
Note 1)
O-ring: NBR
Option
2
ø5/32 inch
(AWG26), Insulator O.D.: 1.0 mm
ø4 mm
C4L
75 g
79 g
37 g
ISE30A
2.4 to 20 mA ±2.5% F.S.
0.6 to 5 V ±2.5% F.S.
–0.100 to 1.000 MPa
–0.105 to 1.050 MPa
ø6 mm
(Positive pressure)
0.001 MPa
C6L
73 g
77 g
35 g
1.5 MPa
3 cores, copy function, 1 m
Copy function (up to 10 slaves)
O-ring, one-touch clip included
O-ring, one-touch clip included
O-ring, one-touch clip included
O-ring, one-touch clip included
O-ring, one-touch clip included
O-ring, one-touch clip included
Note
ø1/4 inch
N7L
75 g
79 g
37 g

Related parts for ISE30A-N01-P-L