MCP23S08-E/SO Microchip Technology Inc., MCP23S08-E/SO Datasheet - Page 18

• Manufacturer Part Number: MCP23S08-E/SO
• Description: 8-BIT INPUT/OUTPUT EXPANDER, SPI INTERFACE
• Manufacturer: Microchip Technology Inc.
• Type: Programmable Peripheral Interfacer

Specifications of MCP23S08-E/SO

• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

MCP23008/MCP23S08
1.6.9
The INTCAP register captures the GPIO port value at
the time the interrupt occurred. The register is ‘read-
only’ and is updated only when an interrupt occurs. The
register will remain unchanged until the interrupt is
cleared via a read of INTCAP or GPIO.
REGISTER 1-9:
DS21919D-page 18
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-0
ICP7
R-x
INTERRUPT CAPTURE (INTCAP)
REGISTER
ICP7:ICP0: These bits reflect the logic level on the port pins at the time of interrupt due to pin change
<7:0>
1 = Logic-high.
0 = Logic-low.
ICP6
R-x
INTCAP – INTERRUPT CAPTURED VALUE FOR PORT REGISTER (ADDR 0x08)
W = Writable bit
‘1’ = Bit is set
ICP5
R-x
ICP4
R-x
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
ICP3
R-x
ICP2
R-x
© 2007 Microchip Technology Inc.
x = Bit is unknown
ICP1
R-x
ICP0
R-x
bit 0