PIC24FJ256GB210-I/PT Microchip Technology Inc., PIC24FJ256GB210-I/PT Datasheet - Page 208

• Manufacturer Part Number: PIC24FJ256GB210-I/PT
• Description: 100 TQFP 12x12x1mm TRAY, 16-bit, 256KB Flash, 96K RAM, USB
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24FJ256GB210-I/PT

• A/d Inputs: 24 Channel, 10-bit
• Comparators: 3
• Cpu Speed: 16 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 84
• Interface: I2C/SPI/UART/USART/USB
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 100-pin TQFP
• Programmable Memory: 256K Bytes
• Ram Size: 98K Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 85 °C
• Timers: 5-16-bit
• Voltage, Range: 2.2-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part

PIC24FJ256GB210 FAMILY
REGISTER 15-1:
DS39975A-page 208
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
HSC = Hardware Settable/Clearable bit
bit 15
bit 14
bit 13
bit 12-11
bit 10-8
bit 7
bit 6
bit 5
bit 4-2
Note 1:
R-0, HSC
SPIEN
SRMPT
R/W-0
(1)
If SPIEN = 1, these functions must be assigned to available RPn/RPIn pins before use. See Section 10.4
“Peripheral Pin Select (PPS)” for more information.
SPIEN: SPIx Enable bit
1 = Enables the module and configures SCKx, SDOx, SDIx and SSx as serial port pins
0 = Disables themodule
Unimplemented: Read as ‘0’
SPISIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
Unimplemented: Read as ‘0’
SPIBEC<2:0>: SPIx Buffer Element Count bits (valid in Enhanced Buffer mode)
Master mode:
Number of SPI transfers pending.
Slave mode:
Number of SPI transfers unread.
SRMPT: Shift Register (SPIxSR) Empty bit (valid in Enhanced Buffer mode)
1 = SPIx Shift register is empty and ready to send or receive
0 = SPIx Shift register is not empty
SPIROV: Receive Overflow Flag bit
1 = A new byte/word is completely received and discarded
(The user software has not read the previous data in the SPIxBUF register.)
0 = No overflow has occurred
SRXMPT: Receive FIFO Empty bit (valid in Enhanced Buffer mode)
1 = Receive FIFO is empty
0 = Receive FIFO is not empty
SISEL<2:0>: SPIx Buffer Interrupt Mode bits (valid in Enhanced Buffer mode)
111 = Interrupt when the SPIx transmit buffer is full (SPITBF bit is set)
110 = Interrupt when the last bit is shifted into SPIxSR; as a result, the TX FIFO is empty
101 = Interrupt when the last bit is shifted out of SPIxSR; now the transmit is complete
100 = Interrupt when one data is shifted into the SPIxSR; as a result, the TX FIFO has one open spot
011 = Interrupt when the SPIx receive buffer is full (SPIRBF bit set)
010 = Interrupt when the SPIx receive buffer is 3/4 or more full
001 = Interrupt when data is available in the receive buffer (SRMPT bit is set)
000 = Interrupt when the last data in the receive buffer is read; as a result, the buffer is empty (SRXMPT
R/C-0, HS
SPIROV
U-0
—
bit set)
SPIxSTAT: SPIx STATUS AND CONTROL REGISTER
C = Clearable bit
W = Writable bit
‘1’ = Bit is set
R-0, HSC
SRXMPT
SPISIDL
R/W-0
(1)
SISEL2
R/W-0
U-0
—
HS = Hardware Settable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
SISEL1
R/W-0
U-0
—
R-0, HSC
SPIBEC2
SISEL0
R/W-0
 2010 Microchip Technology Inc.
x = Bit is unknown
R-0, HSC
SPIBEC1
R-0, HSC
SPITBF
R-0, HSC
SPIBEC0
R-0, HSC
SPIRBF
bit 8
bit 0