SI2401-FS Silicon Laboratories Inc, SI2401-FS Datasheet - Page 47

• Manufacturer Part Number: SI2401-FS
• Description: IC ISOMODEM SYSTEM-SIDE 16SOIC
• Manufacturer: Silicon Laboratories Inc
• Type: Integrated Global DAAr

Specifications of SI2401-FS

• Package / Case: 16-SOIC (3.9mm Width)
• Data Format: V.21, V.22, V.23, Bell 103, Bell 212A
• Baud Rates: 2.4k
• Interface: UART
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Product: Modem Chip
• Supply Voltage (min): 3 V
• Supply Current: 15 mA
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 10 C
• Mounting Style: SMD/SMT
• Package: 16SOIC
• Main Category: Chipset
• Sub-category: ISOmodem
• Maximum Data Rate: 2.4 Kbps
• Typical Operating Supply Voltage: 3.3 V
• Power Supply Type: Digital
• Typical Supply Current: 10 mA
• Minimum Operating Supply Voltage: 3 V
• Maximum Operating Supply Voltage: 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1167 - BOARD EVAL SI2401 UART INTERFACE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 336-1095

S82 (IST). Intrusion
Reset settings = 0000_1000 (0x08)
Bit
7:4
2:1
Name
3
0
Type
Bit
Reserved
IST[3:0]
IB[1:0]
Name
LCLD
D7
Intrusion Settling Time.
0000 = IST equals 1 second.
Delay between when the ISOmodem
algorithm begins (250 ms units).
Loop Current Loss Detect.
0 = Disable.
1 = Enables the reporting of “I” and “L” result codes while off-hook. Asserts INT if
GPIO4 (SE2[7:6]) is enabled as INT.
Intrusion Blocking.
This feature only works when SDF ≠ 0x00. Defines the method used to block the off-hook
intrusion algorithm from operating after dialing has begun.
00 = No intrusion blocking.
01 = Intrusion disabled from start of dial to end of dial.
10 = Intrusion disabled from start of dial to register S29 time out.
11 = Intrusion disabled from start of dial to carrier detect or to “N” or “n” result code.
Read returns zero.
D6
IST[3:0]
R/W
D5
Rev. 1.1
D4
®
chipset goes off-hook and the off-hook intrusion
Function
LCLD
R/W
D3
D2
Si2401/Si3008
IB[1:0]
R/W
D1
D0
47