XW2Z-200J-B1 Omron, XW2Z-200J-B1 Datasheet - Page 238
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XW2Z-200J-B1
Manufacturer Part Number
XW2Z-200J-B1
Description
CONNECTOR CABLE 2M
Manufacturer
Omron
Datasheet
1.XW2Z-100J-C1.pdf
(414 pages)
Specifications of XW2Z-200J-B1
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
XW2Z200JB1
- Current page: 238 of 414
- Download datasheet (20Mb)
7-8-4
Positioning or Speed
Control Using a
Virtual Axis
7-9
7-9-1
7-9-2
Analog Input Functions
Target frequency
Internal pulse frequency
(Speed command)
Analog Input Functions
Application Example
Applicable Models
Overview
(Hz)
Execution of AXIS
Pulses generated
by AXIS
The internal pulse count can be treated as a virtual axis position in order to
perform electronic cam operation on the real axis operation with simple curve
approximation.
First, the AXIS instruction is executed to generate an internal pulse count. The
internal pulse count is read at every cycle, that pulse count is processed with
basic arithmetic operations or the APR instruction, and the result is used as a
target position or target speed in the PULS(886) instruction. The PULS(886)
instruction (in electronic cam control) is executed immediately after the target
position or speed is calculated.
Simple locus control can be performed by executing electronic cam control
simultaneously on both pulse outputs 1 and 2 using the same virtual axis as
above.
The FQM1-MMA21 Motion Control Module can input analog input signals at
high-speed (A/D conversion time: 40 µ s).
One of five signal types for analog inputs can be selected: − 10 to +10 V, 0 to
10 V, 0 to 5 V, 1 to 5 V, and 4 to 20 mA.
Analog input values are stored in the Motion Control Module’s Auxiliary Area
in A550. The stored input value is the analog input value read at END refresh-
ing. It is also possible to adjust the analog input values.
FQM1-MMA21
Execute constant cycle time
PULS (Electronic Cam
Mode) is executed in the
program with changed
target position and speed.
Model
Time
Pulse output PV (normal pulse output)
Pulse count
(Virtual pulses)
Motion Control Module for Analog I/O
Functions
Target position
Execution of PULS
(Changes target position
and speed.)
Time
Time
Section 7-9
215