DS33X41+ Maxim Integrated Products, DS33X41+ Datasheet - Page 56
DS33X41+
Manufacturer Part Number
DS33X41+
Description
IC MAPPING ETHERNET 256CSBGA
Manufacturer
Maxim Integrated Products
Datasheet
1.DS33X11.pdf
(375 pages)
Specifications of DS33X41+
Applications
Data Transport
Interface
Parallel/Serial
Voltage - Supply
1.8V, 2.5V, 3.3V
Package / Case
256-CSBGA
Mounting Type
Surface Mount
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
- Current page: 56 of 375
- Download datasheet (3Mb)
8.12.3 Link Capacity Adjustment Scheme (LCAS)
The Link Capacity Adjustment Scheme (LCAS) provides the capability to add and remove members from a VCAT
VCG. If LCAS is enabled viaVCAT.RCR2.LE[3:0], the receive LCAS block will extract all LCAS frame information
from the VCAT overhead. The LCAS status registers report the CTRL, GID, RS-ACK, and MST fields of the VCAT
frame. The LCAS CTRL field communicates the intent to add or remove a member from the group. The device
coordinates the addition or removal of links from the group of active members so that changes are hitless.
The transmit MST values are automatically controlled by the device by default. Optionally, this function can be
controlled by user software via the VCAT.TLCR3–VCAT.TLCR6 registers. The Transmit MST field communicates
the condition of the line (e.g., an LOM alarm), the reception of an Add command (and subsequent successful
alignment to the VCG), and the reception of a Remove command.
To enable Transmit LCAS, follow the initialization steps outlined in Section 8.12.2.2. Note that the
VCAT.TLCR8.CTRL[3:0] bits should be initialized with a CTRL command of IDLE. All changes to the CTRL[3:0]
register bits must be followed with a zero-to-one transition on VCAT.TCR1.TLOAD for the change to take effect.
Receive LCAS
• Aligns all members of the VCG
• Reports relevant fields and alarms to status registers
• Automatically transmits MST back to the Source (Manual control also configurable)
Transmit LCAS
• Outputs CTRL, MST, GID, RS-Ack to be inserted into VCAT overhead
• GID PRBS generator and insertion
• User-Configured GID insertion
• CRC generation and insertion
8.12.3.1Example LCAS Operation
Rev: 063008
________________________________________________ DS33X162/X161/X82/X81/X42/X41/X11/W41/W11
1. Initial CTRL command of IDLE, SQ value = max (16 for T1/E1, 8 for T3/E3)
2. Addition of Member:
3. Removal of Member
4. Response to Receive LCAS reporting MST=FAIL
a. Send ADD command, Change SQ value to 1+ SQ value(active link with the highest SQ)
b. Wait for MST=OK on Receive LCAS (VCAT.RLSR1 register)
c. Send EOS on this port; Port that was sending EOS now sends NORM
a. Change command from NORM/EOS to IDLE; Change SQ value to max; Reorder other active
a. If the Receive LCAS reports that a MST value changed from OK to FAIL, the Transmit LCAS
b. The SQ value remains the same.
c. If the member that changes to DNU was EOS, EOS must be assigned to the member next in line.
members’ SQ; If change was from EOS to IDLE, then next highest member changes from NORM
to EOS
should send DNU on that port.
Functions:
Functions:
56 of 375
Related parts for DS33X41+
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
MAX7528KCWPMaxim Integrated Products [CMOS Dual 8-Bit Buffered Multiplying DACs]
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Single +5V, fully integrated, 1.25Gbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Single +5V, fully integrated, 155Mbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Highly Integrated Level 2 SMBus Battery Chargers
Manufacturer:
Maxim Integrated Products
Datasheet:
Part Number:
Description:
Current Monitor and Accumulator with Integrated Sense Resistor; ; Temperature Range: -40°C to +85°C
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
QFN 16/A°/AC-DC and DC-DC Peak-Current-Mode Converters with Integrated Step
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
TDFN/A/65V, 1A, 600KHZ, SYNCHRONOUS STEP-DOWN REGULATOR WITH INTEGRATED SWI
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
Integrated Temperature Controller f
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
EVALUATION KIT/2.4GHZ TO 2.5GHZ 802.11G/B RF TRANSCEIVER WITH INTEGRATED PA
Manufacturer:
Maxim Integrated Products
Part Number:
Description:
QFN/E/DUAL PCIE/SATA HIGH SPEED SWITCH WITH INTEGRATED BIAS RESISTOR
Manufacturer:
Maxim Integrated Products
Datasheet: