ISPNANO S3 KIT Equinox Technologies, ISPNANO S3 KIT Datasheet - Page 63

• Manufacturer Part Number: ISPNANO S3 KIT
• Description: ISP PORTABLE PROGRAMMER
• Manufacturer: Equinox Technologies
• Series: -r
• Type: Portable ISPr

Specifications of ISPNANO S3 KIT

• Contents: Programmer, Cables, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ATMEL AT90S, AT90CAN, AT90USB, ATtiny, ATmega, AT91SAM7xx, Zensys Z-Wave, 24xxx Serial EEPROM's
• Other names: 483-1022; ISPNANO S3 KIT; Q5595084; T1310537

3. Connect the supplied USB cable between the USB Port on the rear of the programmer and a spare
USB port either on the PC or a USB Powered Hub.
3.4.3 Selecting the USB – Virtual COM Port (VCP) in EQTools
Please refer to Application Note AN126 for further instructions on setting up and testing the USB
‘Virtual COM Port’.
ISPnano Series Programmer - User Manual – V1.11 – 12
The PC should display a message “Found new hardware…..”
•
•
•
•
•
•
•
Follow the on-screen instructions to install the USB Driver.
Please refer to Application Note AN126 for further instructions.
Make sure the USB cable is connected between the programmer and PC
Power up the programmer
In EQTools, select <Programmer> <Communications and scripting settings>
Select the COM port which corresponds to the VCP which the programmer is connected to.
Click <Test> to test if the PC can communicate to the programmer via USB
th
May 2011
47